Boston, Massachusetts Calibration Lab

Industry-leading turnaround times

location/acute

Calibration of all major leading manufacturers

location/oscilloscope

Accredited calibrations to ISO/IEC 17025:2017

location/architecture

Pickup and delivery throughout Massachusetts

location/shipping

In-lab and onsite services available

location/location

Consistent lab processes with CalTrak Metrology System

location/tool

Welcome to our Boston, Massachusetts lab, located in Wilmington, MA just 30 minutes from Boston and New Hampshire. Our laboratory is ISO/IEC 17025:2017 Accredited and provides local depot and onsite calibration services to the surrounding area. 

Accreditations at our Boston Lab 

• ISO/IEC 17025:2017
• ANSI/NCSL Z540-1-1994 (R2002)
• ANSI/NCSL Z540.3-2006 (R2013)

location/pdf

Transcat Calibration Services

149 River Street, Suite 3
Andover, MA 01810

Phone: (978) 988-3910

[email protected]

Did you Know?

Our Boston, MA laboratory is a full-service calibration facility supporting a wide range of disciplines. It provides general-purpose calibration services across electrical, dimensional, mechanical, and pressure parameters to meet diverse customer needs. In addition to calibration, the site is an authorized service center for select manufacturers, offering both repair and service support.

As a general-purpose calibration lab, this location provides local depot and on-site calibration services including:

  • Ability to certify analog or digital units from 0.125 inches of water to 72,500 psi
  • RF and Microwave calibration services, up to 50GH
  • Vision Machine
  • LMU capability
  • Gas Detectors (LEL, O2, CO, H2S, contact for others)
  • Pressure devices up to 15,000 PSIG
  • Mass Calibration 1 mg to 1 kg Class 1
  • DOD & Pharma Calibrations
Request a Calibration Quote
Accredited Calibration Service Capabilities

Transcat’s Boston lab offers extensive calibration capabilities covering a broad range of test and measurement including: 

Calibrators

Dimensional

  • Dimensional Calibration Services in Boston, MA
  • Calipers Calibration Services in Boston, MA
  • Crimp Tools Calibration Services in Boston, MA
  • Depth Gages Calibration Services in Boston, MA
  • Gage Blocks Calibration Services in Boston, MA
  • Height Gages Calibration Services in Boston, MA
  • Indicators Calibration Services in Boston, MA
  • Micrometers Calibration Services in Boston, MA
  • Parallels Calibration Services in Boston, MA
  • Pin Gages Calibration Services in Boston, MA
  • Protractors Calibration Services in Boston, MA
  • Rulers Calibration Services in Boston, MA

Electrical

Electronic

Flow

  • Air Flow Calibration Services in Boston, MA
  • NEW Liquid Flow Calibration Services in Boston, MA

Liquid Handling

  • Pipettes Calibration Services in Boston, MA

Mass

Physical

Pressure

Temperature

Accredited Reference Level Capabilities

Our Boston lab also offers Reference Level Calibrations in multiple disciplines - with faster turnaround than the OEM. Few commercial calibration operations are equipped with the quality systems that allow Transcat to offer ISO/IEC 17025:2017 accredited reference level calibrations.  Transcat is one of a select few commercial calibration operations qualified to be accredited as a Reference Laboratory in the disciplines of Temperature, Electrical, Pressure, Dimensional, Mass and Humidity. 

Reference Electrical Standards

  • Reference Electrical Standards Calibration Services in Boston, MA
  • DC/Low Frequency Calibration Services in Boston, MA
  • Current Shunts Calibration Services in Boston, MA
  • High Accuracy Digital Multimeters Calibration Services in Boston, MA
  • Multifunction Calibrators Calibration Services in Boston, MA
  • Phase Calibration Services in Boston, MA
  • Precision Capacitors Calibration Services in Boston, MA
  • Precision Inductors Calibration Services in Boston, MA
  • Precision Resistors Calibration Services in Boston, MA

Reference Temperature Standards

Pressure

  • Dead Weight Testers, Pneumatic & Hydraulic Calibration Services in Boston, MA
  • High Precision Pressure Controllers Calibration Services in Boston, MA
  • High Precision Pressure Transducers Calibration Services in Boston, MA
  • Very Low Pressure Installments Calibration Services in Boston, MA

Dimensional

  • Custom Fixturing Calibration Services in Boston, MA
  • Diameter Master Rings Calibration Services in Boston, MA
  • End Measuring Rods Calibration Services in Boston, MA
  • Gage Blocks Calibration Services in Boston, MA
  • Height Masters Calibration Services in Boston, MA
  • Overlays Calibration Services in Boston, MA
  • Pin Gages Calibration Services in Boston, MA
  • Plug Gages Calibration Services in Boston, MA
  • Sine Bars/Plates Calibration Services in Boston, MA
  • Thread Gages Calibration Services in Boston, MA
  • Thread Wires Calibration Services in Boston, MA

Mass

  • Mass Calibration Services in Boston, MA
  • Weights in Classes 1-7 up to 25 kg Calibration Services in Boston, MA
  • Load Cells Calibration Services in Boston, MA
  • Proving Rings Calibration Services in Boston, MA

High Voltage

  • High Voltage Calibration Services in Boston, MA
  • AC (0 to 80k) Calibration Services in Boston, MA
  • DC (0 to 120k) Calibration Services in Boston, MA
  • Probes, Dividers &amp Meters Calibration Services in Boston, MA
Other Metrology Capabilities

Parts inspection and calibration are available with ISO/IEC 17025:2017 Transcat Accredited Quality. In our lab OR onsite at your organization, you can request dimensional analysis for part inspection.  

Learn More about Calibration Services from
Transcat

Discover the full scope of services from Transcat and learn how we support
customers across the globe here.

I've used transact for calibrating our lab's environmental systems for several years now and received nothing but excellent service. I have no intention of seeking another vendor to perform the work and would highly suggest them if anyone were ever to ask about who to use.

Michael P., Lab Calibration Technician, Humanetics Innovative Solutions

Request a Calibration Quote

Your request will be assigned to a member of our expert sales and customer service team. You should receive a response within 24 hours. If you need immediate assistance, please call us at (800) 828-1470.

Request a Calibration Quote