US 
CAN - en Fluke 725-L VIP Kit
Order #: 725E-L-VIP
Mfg #: FLUKE-725 US
Fluke 725-L VIP Kit
Order #: 725E-L-VIP
Mfg #: FLUKE-725 US
Exclusive VIP Kit includes FREE Universal Carrying Case, FREE Mini Plug To Pigtail T/C Lead Set , FREE Toolpack , and FREE Pack of Green Calibration Labels . The one multifunction calibrator you need for all of your process calibrations.
Only need this item for a short time? Learn about rentals
Overview
“Simply” Powerful!
Take along the Fluke 725 Multifunction Process Calibrator, and you're equipped to test and calibrate almost any process parameter. Measure and source mA, volts, temperature (RTDs and thermocouples), frequency, ohms, and pressure, using optional pressure modules.
From the moment you pick it up, the Fluke 725 is ready to perform. Its simple controls, without menus, make operation easy.
Want more precision, pulse sourcing, totalizing and more? Consider the Fluke 726 Precision Multifunction Calibrator.
Need an intrinsically safe rating in your calibrator? Consider the Fluke 725Ex Intrinsically Safe Multifunction Process Calibrator.
Want documenting and HART communication built into your calibrator? Consider the Fluke 754 Documenting Process Calibrator with HART.
Product Highlights
- Value Incentive Package
- LIMITED TIME ONLY! Hurry Offer Ends Soon!
- Temperature Calibrator (745), with FREE Carrying Case (C-101), & FREE T/C Lead Set (22171T), & FREE Toolpak Hanger (TPAK80-4) FREE PST Tool (61010101), & FREE Calibration Labels
- Over $150 Savings
- 725 - Can source/simulate volts, mA, RTDs, thermocouples, frequency, and ohms. Measure and source pressure using Fluke 700P series pressure modules. Has Dual display shows input and output. Dual display shows input and output. Programmable step and ramp for automated testing. Powered by 4 AA batteries (25 hours typical operation)
- FREE C-101 - Universal Carrying Case! Zippered section holds Multimeters, Single Function Calibrators, etc. Velcro pouch for leads and accessories. Snappable belt loops on back hold up to a 4" wide belt.
- FREE 22171T- JKTE Mini Plug To Pigtail T/C Lead Set
- FREE TPAK80-4 Toolpack -Hang your meter by a magnet or a strap hanger. Locks securely to the meter. Includes 6" strap, 17" strap, and slip on magnet.
- FREE PST Tool- PST Consists of the following all in one! Needlenose and Regular Pliers, Wire Cutters, Hard-Wire Cutters, Clip-Point Knife, Metal/Wood File, 8in/20 cm Ruler, Can/Bottle Opener, [Small, Medium, Large and Phillips] Screwdriver, Awl Punch
- FREE Pack of Green Calibration Labels
Each Unit Includes
- Fluke 725
- TL75 Test Leads
- AC70A Test Clips
- One pair of stackable test leads
- Product Overview Manual in 14 different languages
- User Manual on CD-Rom
- TPAK80-4 Took Pack Hanger
- C-101 Carrying Case
- 22171T J,K,T,E Mini T/C Lead Set
- Leatherman PST Tool
- Calibration Labels
Special Member Pricing
Buy with Calibration
Rental Instruments
Access to 100,000+ products
1,000's of instruments in stock
Product selection expertise
Application assistance
Purchase with a PO
-
Special Price $31.49 Regular Price $34.99 -
Special Price $60.29 Regular Price $66.99
-
Special Price $29.69 Regular Price $32.99
-
Special Price $25.19 Regular Price $27.99
-
Fluke TL762mm/4mm Probe & Silicone Test Lead Set
Order #: TL76
Mfg #: 2032684
Availability:Out of stockSpecial Price $35.99 Regular Price $39.99 -
Fluke TL221Safety Silicone Lead Extension 1.5m
Order #: TL21E
Mfg #: 2003602
Availability:Out of stockSpecial Price $30.59 Regular Price $33.99 -
Fluke TL222SureGrip Silicone Right Angle Test Lead Set
Order #: TL22
Mfg #: 2003616
Availability: Ships in 2-3 weeksSpecial Price $30.59 Regular Price $33.99 -
Special Price $29.69 Regular Price $32.99
-
Fluke TL910Electronic Test Probes w/Replacement Tips
Order #: TL910
Mfg #: 1616632
Availability:Out of stockSpecial Price $69.29 Regular Price $76.99 -
Special Price $35.99 Regular Price $39.99
-
Special Price $78.29 Regular Price $86.99
-
Fluke TL220Industrial Test Lead Set for All Fluke Meters
Order #: TL20
Mfg #: 2003625
Availability:Out of stockSpecial Price $76.49 Regular Price $84.99 -
-
Fluke 80PK-27SureGrip Industrial Surface Temperature Probe
Order #: 80PK-27
Mfg #: 2098723
Availability:Out of stockSpecial Price $314.99 Regular Price $349.99 -
Special Price $40.49 Regular Price $44.99
-
Fluke TLK-220US SureGrip Accessory Set w/Meter Carrying Case
Order #: TLK-220
Mfg #: 2097010
Availability: Ships in 2-3 weeksSpecial Price $143.99 Regular Price $159.99 -
Fluke TL223SureGrip Electrical Test Lead Set w/TP1 Test Probe
Order #: TL223
Mfg #: 2003633
Availability: Ships in 2-3 WeeksSpecial Price $76.49 Regular Price $84.99 -
Special Price $45.59 Regular Price $56.99
-
Fluke C125Case for Fluke 120 Series ScopeMeters
Order #: C125
Mfg #: 646858
Availability:Out of stockSpecial Price $38.69 Regular Price $42.99 -
Fluke TP38Slim-Reach Test Probe Set, Insulated
Order #: TP38
Mfg #: 1541636
Availability:Out of stockSpecial Price $20.69 Regular Price $22.99 -
Special Price $49.31 Regular Price $65.99
| Measurement Accuracy | ||
| Voltage DC | 30.000 V | 0.02% + 2 counts (upper display) |
| 30.000 V | 0.02% + 2 counts (lower display) | |
| 100.00 mV | 0.02% + 2 counts | |
| -10.00 mV to 75.00 mV | 0.025% + 1 count (via TC connector) | |
| Current DC | 24.000 mA | 0.02% + 2 counts |
| Resistance | 0.0 to 400.0 Ω | 0.1 Ω (4-wire), 0.15 Ω (2- and 3-wire) |
| 401 to 1500 Ω | 0.5 Ω (4-wire), 1 Ω (2- and 3-wire) | |
| 1500 to 3200 Ω | 1 Ω (4-wire), 1.5 Ω (2- and 3-wire) | |
| Frequency | 2.0 to 1000.0 CPM | 0.05% + 1 count |
| 1.0 to 1100.0 Hz | 0.05% + 1 count | |
| 1.00 to 10.00 kHz | 0.05% + 1 count | |
| Sensitivity | 1 V peak-to-peak-minimum | |
| Pressure | Accuracy from 0.025% of range using any of 29 pressure modules (for detailed specifications refer to pressure modules in options and accessories). Modules available for differential, gauge, vacuum, absolute, dual and high pressure. | |
| Source Accuracy | ||
| Voltage DC | 100.00 mV | 0.02% + 2 counts |
| 10.000 V | 0.02% + 2 counts | |
| -10.00 mV to 75.00 mV | 0.025% + 1 count (via TC connector) | |
| Current DC | 24.000 mA (source) | 0.02% + 2 counts |
| 24.000 mA (simulate) | 0.02% + 2 counts | |
| Resistance | 15.0 to 400.0 Ω | 0.15 Ω (exc. current 0.15 to 0.5 mA), 0.1 Ω (exc. current 0.5 to 2 mA) |
| 401 to 1500 Ω | 0.5 Ω (excitation current 0.05 to 0.8 mA) | |
| 1500 to 3200 Ω | 1 Ω (excitation current 0.05 to 0.4 mA) | |
| Frequency | 2.0 to 1000.0 CPM | 0.05% |
| 1.0 to 1100.0 Hz | 0.05% | |
| 1.00 to 10.00 kHz | 0.25% | |
| Waveform | 5 V p-p squarewave, -0.1 V offset | |
| RTDs and Thermocouples | ||
| Measure accuracy | NI-120 | 0.2°C |
| PT-100 (385) | 0.33°C | |
| PT-100 (393) | 0.3°C | |
| PT-100 (JIS) | 0.3°C | |
| PT-200 (385) | 0.2°C | |
| PT-500 (385) | 0.3°C | |
| PT-1000 (385) | 0.2°C | |
| Resolution | 0.1°C | |
| J | 0.7°C | |
| K | 0.8°C | |
| T | 0.8°C | |
| E | 0.7°C | |
| R | 1.8°C | |
| S | 1.5°C | |
| B | 1.4°C | |
| L | 0.7°C | |
| U | 0.75°C | |
| N | 0.9°C | |
| Resolution | J, K, T, E, L, N, U: 0.1°C, 0.1°F B, R, S: 1°C, 1°F | |
| XK | 0.6°C | |
| BP | 1.2°C | |
| Source accuracy | NI-120 | 0.2°C |
| PT-100 (385) | 0.33°C | |
| PT-100 (393) | 0.3°C | |
| PT-100 (JIS) | 0.3°C | |
| PT-200 (385) | 0.2°C | |
| PT-500 (385) | 0.3°C | |
| PT-1000 (385) | 0.2°C | |
| Resolution | 0.1°C | |
| Accuracy stated for 4-wire measurement. | ||
| J | 0.7°C | |
| K | 0.8°C | |
| T | 0.8°C | |
| E | 0.7°C | |
| R | 1.4°C | |
| S | 1.5°C | |
| B | 1.4°C | |
| L | 0.7°C | |
| U | 0.75°C | |
| N | 0.9°C | |
| Resolution | J, K, T, E, L, N, U: 0.1°C, B, R, S: 1°C | |
| XK | 0.6°C | |
| BP | 1.2°C | |
| Specifications | ||
| Ramp functions | Source functions | Voltage, current, resistance, frequency, temperature |
| Ramps | Slow ramp, Fast ramp, 25% step-ramp | |
| Loop power function | Voltage | 24 V |
| Accuracy | 10% | |
| Maximum current | 22 mA, short circuit protected | |
| Step functions | Source functions | Voltage, current, resistance, frequency, temperature |
| Steps | 25% of range, 100% of range | |
| Environmental Specifications | ||
| Operating temperature | -10°C to +55°C | |
| Storage temperature | -20°C to 71°C | |
| Operating altitude | 3000 m | |
| Safety Specifications | ||
| Agency approvals | EN 61010-1:1993, ANSI/ISA S82.01-1994; CAN/CSA C22.2 No 1010.1:1992 | |
| Mechanical and General Specifications | ||
| Size | 130 x 236 x 61 mm | |
| Weight | 0.65 kg | |
| Batteries | 4 AA alkaline batteries | |
| Battery replacement | Separate battery compartment, accessable without breaking calibration seal | |
| Side port connections | Pressure module connector, also used for remote real-time programming | |
