Fluke 373
Order #: 373
Mfg #: 3780249
Fluke 373
Order #: 373
Mfg #: 3780249
Only need this item for a short time? Learn about rentals
Overview
Be ready for anything.
The Fluke 373 Clamp Meter offers improved performance perfect for any AC only current measurement situations. Featuring True RMS AC voltage and current measurements, and resistance measurement up to 6000 Ω with continuity detection, the Fluke 373 is everything you need, plus a little more.
Product Highlights
Check out Transcat's Fluke Clamp Meter Selection Guide!
- Replaces the Fluke 333, 334, and 335
- 600 A ac current measurement with fixed Jaw
- 600 V ac and dc voltage measurement
- True-rms ac voltage and current for accurate measurements on non-linear signals
- Resistance measurement to 6000Ω with continuity detection
- 1000 µF capacitance measurement
- State of the art signal processing allows for use in noisy electrical environments while providing stable readings
- Large, easy to read, backlight display automatically sets the correct measurement range so you do not need to change switch positions while taking a measurement
- CAT IV 300V, CAT III 600 V safety rating
- Three year warranty
- Soft carrying case
Each Unit Includes
- Coated instruction card
- Safety information sheet
- Soft carrying case
- TL75 test leads
- Five AA Alkaline batteries
Special Member Pricing
Buy with Calibration
Rental Instruments
Access to 100,000+ products
1,000's of instruments in stock
Product selection expertise
Application assistance
Purchase with a PO
- Fluke TL223SureGrip Electrical Test Lead Set w/TP1 Test Probe
Order #: TL223
Mfg #: 2003633
Availability:In stockSpecial Price $89.99 Regular Price $99.99 - Tektronix AC220SOFT CARRYING CASE FOR TDS210/ 220
Order #: AC220
Mfg #: AC220
Availability:Out of stockCall for price - Fluke H3Holster for the Fluke 330 Series Clamp Meters
Order #: H3
Mfg #: 1608458
Availability:In stockSpecial Price $40.49 Regular Price $44.99 - Fluke TL220Industrial Test Lead Set for All Fluke Meters
Order #: TL20
Mfg #: 2003625
Availability:In stockSpecial Price $89.99 Regular Price $99.99 - Myron L Company TP1Conductivity/TDS/Temperature Meter,TechPro II
Order #: TP1
Mfg #: TP1
Availability: Ships in 3-4 weeksSpecial Price $737.38 Regular Price $801.50
AC Current | |
Range | 600.0 A |
Resolution | 0.1 A |
Accuracy | 2 % ± 5 digits (48 – 62 Hz) |
Crest Factor (50/60 Hz) | 2.5 @ 600 A |
AC Voltage | |
Range | 600.0 A |
Resolution | 0.1 A |
Accuracy | 1.0 % ± 5 digits (48 – 62 Hz) |
DC Voltage | |
Range | 600.0 A |
Resolution | 0.1 A |
Accuracy | 1 % ± 5 digits |
Resistance | |
Range | 600.0 Ω/6000 Ω |
Resolution | 0.1 Ω/1 Ω |
Accuracy | 1 % ± 5 digits |
Continuity Beeper | 30 Ω |
Capacitance | |
Range | 10.0 – 100.0 μF / 1000 μF |
Resolution | 0.1 μF/1 μF |
Accuracy | 1.9 % ± 2 digits |
Mechanical Specifications | |
Size (L x W x H) | 232 mm x 85 mm x 45 mm |
Weight | 370 g |
Environmental Specifications | |
Operating Temperature | -10 °C to +50 °C |
Storage Temp | -40 °C to +60 °C |
Operating Humidity | Non condensing (< 10 °C) |
≤ 90 % RH (at 10 °C to 30 °C) | |
≤ 75 % RH (at 30 °C to 40 °C) | |
≤ 45 % RH (at 40 °C to 50 °C) | |
(Without Condensation) | |
Operating Altitude | 3000 meters |
Storage Altitude | 12,000 meters |
EMI, EMC | Meets all applicable requirements in EN61326-1:2006 |
Temperature Coefficients | Add 0.1 x specified accuracy for each degree C above 28 °C or below 18 °C |
Safety Compliance | ANSI/ISA S82.02.01:2004 |
CAN/CSA-C22.2 No. 61010-1-04 | |
IEC/EN 61010-1:2001, 600V CAT III, 300V CAT IV | |
Pollution Degree 2 | |
EN/IEC 61010-2-32:2002 | |
EN/IEC 61010-031:2002/A1:2008 | |
Agency Approvals | |
Batteries | 2 AA, NEDA 15A, IEC LR6 |
Visit our Fluke Clamp Meter Selection Guide
-
-
-
-
Fluke 381Remote Display True-rms AC/DC Clamp Meter w/iFlexSpecial Price $695.69 Regular Price $772.99
-
-
-
-
-
-
-