AEMC 2133.12
Medium Voltage Motor Test Kit

Order #: 2133.12

Mfg #: 2133.12

Questions about availability or need help? Contact Us:

(800) 633-0561

AEMC 2133.12

Medium Voltage Motor Test Kit

Order #: 2133.12

Mfg #: 2133.12

This item is no longer available. Please contact Transcat Customer Service for assistance with alternative product suggestions to meet your exact needs.

Only need this item for a short time? Learn about rentals

Questions about this product? Speak to an expert

Product Highlights

Motor Test Kit {Medium Voltage} includes:

6524: Multifunction Insulation Resistance Tester, 1000V

  • True Megohmmeter
  • 1 kV Insulation and Multi-Function Tester (Resistance, Continuity, Frequency and Voltage)
  • 50V, 100V, 250V, 500V and 1000V Insulation Test Voltages
  • 200GΩ Max Insulation Resistance
  • DAR and PI ratios calculated
  • Timed Test Mode up to 40 minutes for Insulation Resistance Test
  • Test Lock feature for hands free timed measurements up to 15 minutes
  • Continuity tests at 20mA or 200mA
  • Test lead resistance compensation for accurate low resistance measurements
  • True RMS AC/DC Voltmeter up to 700V
  • Ohmmeter to 1000kΩ
  • Frequency measurements from 15 to 800Hz
  • Auto discharge after Insulation Test
  • Hold function to "freeze" readings
  • Large and bright dual display with blue backlight
  • Auto Standby Feature due to inactivity saves battery power
  • 300 Measurement storage in memory
  • Optional Remote Probe accessory

6610: Phase Rotation Meter: The Phase Rotation Meter Model 6610 is an essential tool for any installation, inspection and maintenance facility. The Model 6610 is a phase meter with voltage sensing detector clips (no metal contact points) designed to identify phase rotation on 3-phase systems and identify live and open/de-energized phases. The phase order is determined as soon as the leads are connected. The presence of live wires and phase sequence are provided by LED indication and buzzer as soon as detection has occurred. The Model 6610 is ideal for installing rotating machinery or motors, and for checking generator phase rotation direction.

205: Power Clamp-on Meter, 1000VAC/DC: The True RMS Clamp-On Meter Model 205 is safety rated at 600V CAT IV. It measures AC+DC volts and amps, frequency, continuity, resistance, power and Power Factor, phase rotation, and THD. It can also perform diode checks. The Delta relative function compares new measurements to a reference value, and the MIN/MAX function tracks high and low values. The Model 205 also tracks peak+ and peak- values. This compact and rugged meter can operate in the most demanding work environments, and its IP40 rating allows it to withstand both dust and water spray.

Large Tool Bag: Dimensions: 18 x 9 x 12"

Special Member Pricing
Buy with Calibration
Rental Instruments
Access to 100,000+ products
1,000's of instruments in stock
Product selection expertise
Application assistance
Purchase with a PO

AEMC 6524

AC/DC Voltage Measurement
Range 0.3 to 700V
Accuracy ±(3% R + 2ct)
Resolution 0.3 to 399.9V: 0.1V
400 to 700V: 1V
Frequency Range DC & 15.3 to 800Hz
Input Impedance  400kΩ
Insulation Measurement
Test Voltage / Resistance Range 50V: 10kΩ to 10GΩ
100V: 20kΩ to 20GΩ
250V: 50kΩ to 50GΩ
500V: 100kΩ to 100GΩ
1000V: 200kΩ to 200GΩ
Measurement Accuracy 50V: ±(3% R + 2ct)+2%/GΩ
100V: ±(3% R + 2ct)+1%/GΩ
250V: ±(3% R + 2ct)+0.4%/GΩ
500V: ±(3% R + 2ct)+0.2%/GΩ
1000V: ±(3% R + 2ct)+0.1%/GΩ
Auto Discharge Discharge time < 2s/µF From Vtest to 25V
Live Circuit Indicator Inhibit test if terminal voltage > 25V prior to initialization of test
Continuity Measurement
Ranges 0.00 to 10Ω (200mA test current)
0.0 to 100Ω (20mA test current)
Accuracy ± (2% R + 2ct) with lead compensation
Open Voltage ≥ 6V
Resistance Measurement
Range 1Ω to 1000kΩ
Accuracy ± (3% R + 2ct)
Open Voltage Approximately 4.5V
General Features
Programmable Alarm Yes
DAR - PI Yes
Timer 0:00 to 39:59mn, with 1s resolution
Frequency Measurement 15.3 to 800Hz
Display Backlit digital with bargraph
Memory 300 tests
Power Supply Six AA batteries (NEDA 15A or IEC LR6)
Battery Life ≥1500 IR tests at 1000 V into 1MΩ with a duty cycle of 5 seconds on and 1 min off.
≥3000 R tests of 1Ω with a duty cycle of 5 seconds on and 1min off.
Dimensions 8.31 x 4.25 x 2.36" (211 x 108 x 60mm)
Weight 1.87 lbs (850g)
Altitude Operating 2000m
Operating Temperature -4° to +131°F (-20° to +55°C) & 20 to 80% RH
Storage Temperature -22° to +176°F (-30° to +80°C) & 10 to 90% RH, without batteries
IP Rating IP 54
Safety Compliance IEC/EN 61010-1, 600V CAT IV, IEC 61557

AEMC 6610

Connection Method Non-Contact Static Induction with Color-coded Leads
Operating Voltage 75 to 1000VAC
Frequency Range 45 to 65Hz
Phase Rotation Indicator LEDs For ABC or BAC Rotation
Auto OFF Yes if not in use for 5 Minutes
Power Supply One 9V Alkaline Battery (Included)
Low Battery Indicator Yes
Dimensions 5.0 x 2.8 x 1.8" (128 x 72 x 46mm)
Maximum Clamping Diameter 1.18" (30mm)
Weight (With Battery) 13.1 oz (375g)
Operating Temperature 14° to 122°F (-10° to 50°C)
Storage Temperature -4° to 140°F (-20° to 60°C)
Relative Humidity 80%
Safety Compliance IEC 61010-1; 1000V CAT III ; 600V CAT IV
Electro-Magnetic Compatibility EN 61326-1
CE Approved Yes

AEMC 205

Voltage Range: 1000Vrms AC/DC/AC+DC Auto-ranging
Resolution Max: 0.01V
Current Range: 600Arms AC, 900ADC
Resolution Max: 0.01A
Accuracy V Typical: 1% ± 3cts
Accuracy A Typical: 1% ± 3cts
InRush: 6 to 600AAC, 6 to 900ADC
Power Measurement Max: 600kW AC, 900kW DC
THD: Yes, %f and %r
Continuity: Selectable from 0 to 599.9Ω
Resistance: 60kΩ
Diode Test: 0 to 3.2VDC
Frequency: 20kHz in V, 3kHz in A
Power Factor: Yes
Phase Order: Yes
Power Source: 1 x 9V, IEC LF22
Battery Life: >120 hours
Dimensions: 8.7 x 3.0 x 1.65" (222 x 78 x 42mm)
Weight: 12.0 oz. (340g) with battery
Jaw Opening: 1.34" (34mm)
Operating Temperature: -4° to +131°F (-20 to +55°C)
Storage Temperature: -40° to +158°F (-40 to +70°C)
Operating Humidity: 90% up to 131°F (55°C)
Pollution Degree: 2
Ingress Protection: IP40
EMC: EN61326-1
Safety Compliance: EN/IEC 61010-1: 1000V CAT III, 600V CAT IV
EN/IEC 61010-2-030:2010
EN/IEC 61010-032:2002