Hioki 3664

Optical Power Meter

Order #: 3664

Mfg #: 3664

Questions about availability or need help? Contact Us:

(800) 633-0561
$880.00

Hioki 3664

Optical Power Meter

Order #: 3664

Mfg #: 3664

$880.00
Availability: Ships in 3-4 weeks
Available Promotions
This product is available for shipping to the United States and Puerto Rico only.
This product is available for shipping to the United States and Puerto Rico only.
This product is available for shipping to the United States and Puerto Rico only.

Only need this item for a short time? Learn about rentals

Questions about this product? Speak to an expert

Product Highlights

  • The POWER METER 3664 must be used in conjunction with either the 9742 or 9742-10 or 9743 or 9743-10 OPTICAL SENSOR, sold separately
  • Highly versatile optical power meter for production lines, R&D and maintenance
  • Compensation function for the laser light source testing
  • Dual power system
  • Fully remote operation via USB interface
  • Optical power measurement W, dBm
  • Range setting Auto (Manual setting available)
  • Accuracy ±0.7% (±5% in combination with the optional sensor)
  • Wavelength sensitivity compensation Can be set for every 1nm. Automatic compensation for the sensor’s sensitivity Max. 10 wavelengths preset (including initial value for a sensor)
  • Scaling Can be set for each wavelength.
  • Relative measurement Display the relative value to the measured value or set value. (Displayed value = Measured value – Reference value)
  • Reference value can be set from the measured value or manual input.
  • Settable range: 0.001nW to 1.9999W (-90.00dBm to 33.00dBm)
  • Display 4-1/2 digit, (19999 max.), Display resolution: 0.01dBm / 0.01dB
  • Measurement display unit nW, mW, mW, dBm, dB
  • Wavelength display 4 digit, Unit: nm
  • Display update rate 330ms approx.
  • MAX/MIN display Maximum and minimum value display while measurement
  • Average display Display the moving average value. Averaging times: 2 to 100
  • Analog output 1V approx. when the sensor calibration point input
  • Output resistance 50Ω
  • Output connector ø3.5 mini jack
  • Interface Output measurement value and remote control
  • Auxiliary functions Auto power save, Setting backup, Battery check
  • Safety EN61010-1: 2001 Pollution degree 2
  • Power supply AA (LR6) × 4, AC adapter (9445-02)
  • Max. rated power 1.6VA
  • Continuous battery operation 60 hours approx. (continuous use with the 9742 at calibration point input)
  • Dimensions and weight 85(W) × 160(H) × 35(D) mm, 270g (excluding batteries)

Each Unit Includes

  • AC Adapter
  • Output cord
  • USB cable
  • USB Driver CD-R
  • Strap
  • Batteries (AAx4)

Special Member Pricing
Buy with Calibration
Rental Instruments
Access to 100,000+ products
1,000's of instruments in stock
Product selection expertise
Application assistance
Purchase with a PO