Graphtec GL7000

Product Highlights

• Includes the GL7000 main module, an Alarm output module, an AC power cable, and software on CD
• Requires at least one amplifier module (under the Accessories tab)
• Modular construction
• A selection of amplifiers tailors the system to address any application
• A range of isolated analog amplifiers support measurements from millivolts to hundreds of volts, as well as thermocouple- and RTD-based temperature measurements
• A logic and pulse input amplifier module provides 16 channels of discrete and/or pulse inputs for state, counting, and rotational rate recording along with analog data
• An included alarm module allows ten alarm outputs that may be triggered by any combination of measured analog or discrete channel levels
• The alarm outputs can drive loads up to 50 V and 2 A
• Programmable sample intervals address the full spectrum of high- and low-speed measurements, from one sample per microsecond to one sample per hour
• Stand-alone or PC-connected operation using included PC side software
• Stand-alone recording to built-in RAM memory for speed, removable SD memory, USB thumb drive, and flash memory for non-volatile recordings
• Optional 64 GB, high-speed SSD memory for non-volatile recording sessions as fast as 1 MHz per channel and file sizes up to 2 GB
• Built-in USB and Ethernet interfaces allow operation as a direct-connected PC-based instrument or a remote Web-based server
• Optional, detachable touch-screen allows local instrument configuration and real time display
• Flexible pre- and post-triggering options give you complete control over when and how data is recorded
• Unique backup feature allows measurements to be automatically backed up over definable intervals to non-volatile SD and SSD memory, or pushed to a local or remote FTP file server
• Multiple GL7000 instruments may be daisy-chained to provide expanded and synchronous operation