Dayton, Ohio Calibration Lab

3 - 5 day turn around times

location/acute

Full dimensional lab capabilities

location/oscilloscope

Accredited calibrations to ISO/IEC 17025

location/architecture

Pickup and delivery throughout OH and IN

location/shipping

In-lab and onsite services available

location/location

Primary Level Reference Temperature calibration

location/tool

Welcome to our Dayton, OH lab, a ISO/IEC 17025 Accredited general purpose calibration lab that provides local in-lab and on-site calibration services throughout Ohio and Indiana. Our Dayton lab is one of two Transcat labs offering Primary Level Reference Temperature calibration up to 660.323°C. We are also a full dimensional lab offering calibration of Gage Blocks ASME B89.1.9 Grade 0, or equivalent and worse, Threaded Plug Gages and Threaded Ring Gages, in addition to Length Measurements with a LabMaster Universal Length Comparator. 

Accreditations at our Dayton Lab 

• ISO/IEC 17025:2017
• ANSI/NCSL Z540-1-1994 (R2002)
• ANSI/NCSL Z540.3-2006 (R2013)

location/pdf

Transcat Calibration Services

2056 South Alex Road
West Carrollton, OH 45449

Phone: (937) 866-1033
daytoncs@transcat.com

Did you Know?

Over 25% of the lab technicians at the Dayton lab have earned the Certified Calibration Technician (CCT) designation from the American Society for Quality (ASQ).

The Transcat Dayton Lab is also a full dimensional lab offering calibration of:

  • Gage Blocks ASME B89.1.9 Grade 0, or equivalent and worse
  • Threaded Plug Gages and Threaded Ring Gages
  • Length Measurements with a LabMaster Universal Length Comparator.
Request a Calibration Quote


Please browse to the location of the file on your computer to upload your instrument list.


Click for service level descriptions
Enter your instrument information below if no file has been provided above.
Cal Interval




Contact Information

Contact Information

Accredited Calibration Service Capabilities

Transcat’s offers extensive calibration capabilities covering a broad range of test and measurement including:

Calibrators

Dimensional

Electrical

Electronic Home

Mass

Physical

Pressure

Temperature

Accredited Reference Level Capabilities

Transcat also offers Reference Level Calibrations in multiple disciplines - with faster turnaround than the OEM. Few commercial calibration operations are equipped with the quality systems that allow Transcat to offer ISO/IEC 17025 accredited reference level calibrations.  Transcat is one of a select few commercial calibration operations qualified to be accredited as a Reference Laboratory in the disciplines of Temperature, Electrical, Pressure, Dimensional, Mass and Humidity. 

Reference Electrical Standards

Reference Temperature Standards

Pressure

Dimensional

  • Custom Fixturing
  • Diameter Master Rings
  • End Measuring Rods
  • Gage Blocks
  • Height Masters
  • Overlays
  • Pin Gages
  • Plug Gages
  • Sine Bars/Plates
  • Thread Gages
  • Thread Wires

Mass

High Voltage

Other Metrology Capabilities

Parts inspection and calibration are available with ISO/IEC 17025 Transcat Accredited Quality. In our lab OR onsite at your organization, you can request dimensional analysis for part inspection.  

Learn More about Calibration Services from
Transcat

Discover the full scope of services from Transcat and learn how we support
customers across the globe here.

I have had the pleasure of working, with not only Sean Sheeran, but a large quantity of the Transcat team since my beginnings here in 2017. Everyone I have personally dealt with has been exceptionally helpful and knowledgeable about the products and services offered. If information is unknown, they have always made it a point to go above and beyond to find the answers we are needing while maintaining a timely manner. The calibration paperwork that we receive is always easily understood and obtainable. The online system has been a tremendous asset to our company as I am sure it has to theirs. Sometimes the calibration certs seem to have legs and walks off with the equipment owners here, so having a means to reprint and/or view them is great.

Sam Roubdioux, Facilities & Site Coordinator, Evonik

Request a Calibration Quote

Your request will be assigned to a member of our expert sales and customer service team. You should receive a response within 24 hours. If you need immediate assistance, please call us at (800) 828-1470.

Request a Calibration Quote