Order #: APV-C3
Mfg #: APV-C3
Dwyer Instruments APV-C3
Order #: APV-C3
Mfg #: APV-C3
Series APV-C Piston Vibrators are air cushioned to provide low noise. This makes it suitable for quiet area applications. It is a good solution to prevent clogs on tank walls and material delivery problems. It can also be applied on vibrating separators and conveyors. HOW IT OPERATES There are air-breathing tubes located in both ends of the cylinder. Compressed air pushes the piston from one side to the other. Vibration power arises when the piston moves back and forth in the body. In APV-C air cushion at both ends produced by the to-and-fro motion will keep the piston from striking the body. Therefore, the piston will not produce much noise. In APV-I, air cushion at the top end is produced by the to-and-fro compression. This will keep the piston from striking onto the body top. The piston will strike directly on the bottom side of the body to produce a strong impact.

Only need this item for a short time? Learn about rentals
Product Highlights
- The body is made of high strength aluminum alloy
- APV-C: Low frequency vibration is the best solution to bridge-break
- APV-I: Allows direct impact onto the target object to product the optimum vibration
- Frequency and amplitude can be adjusted as needed
- Sudden Power on/off will not damage
- Movement by air, easy operation, and no sparking
- They can be installed in hazardous areas or high humidity work environments
Special Member Pricing
Buy with Calibration
Rental Instruments
Access to 100,000+ products
1,000's of instruments in stock
Product selection expertise
Application assistance
Purchase with a PO
-
-
- Dwyer Instruments A3000-00-TampPhotohelic Press.Switch/Gage, 0-.25"W.C.w/Tamper-Proof Knobs$639.75