0 Item(s)

Hioki 8961

High Voltage Unit

Order #: 8961

Mfg Part #: 8961

$1,850.00 USD

Ships in 1-2 weeks

Free shipping over $250

New Purchase Calibration Learn More

Save time and money by calibrating your new instrument before it leaves our warehouse, ensuring it arrives ready to be put into service. Find out how.

Add a Calibration to Your Item

Add Items to Cart

Request a Calibration Quote

Transcat can calibrate your existing instruments.

Request a Calibration Quote

Rent From Transcat

Do you need a test instrument for a short time?

Request a Rental Quote

click on image to view gallery image(s)

View All Hioki Products

Overview :

Product Highlights

  • Insulated input (Voltage to earth : 600 V AC/DC in measurement category 3, and 1000 V AC/DC in measurement category 2)
  • 16-bit A/D conversion facilitates high resolution measurements
  • Built-in true RMS rectified circuit with a wide band from low to high frequencies (DC, or 40 Hz to 10 kHz)
  • Observe instantaneous waveforms of DC and wide band AC signals (DC to 100 kHz)
  • Bundled with dedicated input cables
  • Measurement functions Number of channels: 2, for voltage measurement, DC/RMS selectable
  • Input terminals Safety banana terminals (input impedance 10 M?, input capacitance 5 pF or less), Max. rated voltage to earth: 1000 V AC/DC in CAT II, 600 V AC/DC in CAT III (the maximum voltage that can be applied between input channel and chassis and between input channels without damage)
  • Measurement range 1 V to 50 V/div, 6 ranges, full scale: 20 div, AC voltage for possible measurement/display using the memory function: 700 V rms, low-pass filter: 5/50/500/5 kHz
  • Measurement resolution 1/1600 of measurement range (using 16-bit A/D conversion and when installed in 8860 series)
  • Highest sampling rate 2 MS/s (simultaneous sampling in 2 channels)
  • Accuracy DC amplitude: ±0.25% of full scale (with filter 5 Hz), zero position : ±0.15% of full scale (with filter 5 Hz, after zero adjustment)
  • RMS measurement RMS amplitude accuracy: ±1% of full scale (DC, 40 Hz to 1 kHz, sine waveform), crest factor: 2
  • Frequency characteristics DC to 100 kHz ±3dB
  • Input coupling DC, GND
  • Max. allowable input 1000 V DC (the maximum voltage that can be applied across input pins without damage)
  • Number of installable units Install only up to four units in one 8860 series MEMORY HiCORDER
  • Dimensions and mass 170W × 19.8H × 148.5D mm (6.69 in × 0.78 in × 5.85 in), 310 g (10.9 oz)

Each Unit Includes

  • CONNECTION CORD 9242 × 2 (1.7 m, 5.58 ft length)
  • GRABBER CLIP 9243 × 2