0 Item(s)
Fluke Free Tools Promo

Fluke 1587/ET62MAX+KIT

Electrical Troubleshooting Kit w/62MAX+

This Insulation Multimeter combines a digital insulation tester with a full-featured, True RMS digital multimeter in a single, handheld unit.

Order #: 1587/ET62MAX+KIT

Mfg Part #: 1587/ET62MAX+KIT

$999.99 USD

$899.99 USD

 
 

This product is currently not available.

Request a Calibration Quote

Transcat can calibrate your existing instruments.

Request a Calibration Quote

Rent From Transcat

Do you need a test instrument for a short time?

Request a Rental Quote

click on image to view gallery image(s)

View All Fluke Products Discontinued Product

Overview :

Overview

Two powerful tools in one

The Fluke 1587 Insulation Multimeters combine a digital insulation tester with a full-featured, true RMS digital multimeter in a single, compact, handheld unit, which provides maximum versatility for both troubleshooting and preventative maintenance.

Whether you work on motors, generators, cables, or switch gear, the Fluke 1587 Insulation Multimeters are ideally suited to help you with your tasks and at a cost that is far less than buying the two products.

Product Highlights

  • Establishing preventative maintenance programs are becoming critical to maintaining the uptime of electrical equipment and can significantly reduce both planned and unplanned downtime. Unplanned downtime costs are difficult to calculate, but often significant. For some industries, it can represent 1 % - 3 % of revenue (potentially 30 % - 40 % of profits) annually. The products in this kit have been specifically selected for both troubleshooting and preventative maintenance applications.

Each Unit Includes

  • 1587 Digital Insulation Multimeter
  • 62 Max+ Infrared Thermometer
  • i400 Infrared Thermometer
  • Set of Remote probe
  • Set of Test leads
  • Set of Alligator clips
  • Set of K-type thermocouples

Specifications :

Specifications
Voltage DC Maximum voltage 1000 V
Accuracy ±(0.09% + 2)
Maximum resolution 0.001 V
Voltage AC Maximum voltage 1000 V
Accuracy ±(2% + 3)
AC bandwidth 5 kHz1
1. with low pass filter; 3 db @ 800 Hz
Maximum resolution 0.1 mV  
Current DC Maximum amps 400 mA
Amps accuracy ±(0.2% + 2)
Maximum resolution 0.01 mA
Current AC Maximum amps 400 mA
Amps accuracy ±(1.5% + 2)²
2. 1 kHz bandwidth
Maximum resolution 0.01 mA  
Resistance Maximum resistance 50 MΩ
Accuracy ±(0.9% + 2)
Maximum resolution 0.1 Ω
Capacitance Maximum capacitance 9,999 µF
Accuracy ±(1.2% + 2)
Maximum resolution 1 nF
Frequency Maximum frequency 100 kHz
Accuracy ±(0.1% + 1)
Maximum resolution 0.01 Hz
Temperature Measurement -40.0°C to 537°C
-40.0°F to 998°F excluding probe
Diode test Range/Resolution 6 V / 1 mV
Accuracy ±(2% + 1)
Insulation Test
Minimum test current @ 1kΩ/V 1 mA
Test Voltages 50, 100, 250, 500, 1000 V
Maximum resistance per test voltage 50 V  
100 V  
250 V  
500 V  
1000 V 2 GΩ
Maximum resolution per test voltage 50 V 0.01 MΩ
100 V 0.01 MΩ
250 V 0.1 MΩ
500 V 0.1 MΩ
1000 V 0.1 MΩ
Accuracy per test voltage 50 V ±(3% + 5)
100 V ±(3% + 5)
250 V ±(1.5% + 5)
500 V ±(1.5% + 5)
1000 V ±(1.5% + 5) to 600 MΩ, ±(10% + 3) above 600 MΩ
Environmental Specifications
Operating temperature –20°C to +55°C
Storage temperature -40°C to +60°C
Humidity (without condensation) 0% - 95% (10°C – 30°C)
0% - 75% (30°C – 40°C)
0% - 40% (40°C – 55°C)
Operating altitude 2000 m
Safety Specifications
Overvoltage category Complies with ANSI/ISA 82.02.01 (61010-1) 2004, CAN/CSA-C22.2 NO. 61010-1-04, and IEC/EN 61010-1 2nd Edition for measurement CAT III 1000 V and CAT IV 600 V
Agency approvals 2000 m CAT III 1000 V, CAT IV 600 V; 3000 m CAT II 1000 V, CAT III 600 V
Mechanical and General Specifications
Size 203 x 100 x 50 mm (with holster)
Weight 624 g
Warranty 3 years
Battery life alkaline Meter use 1000 hours
Insulation test u6se Meter can perform at least 1000 insulation tests with fresh alkaline batteries at room temperature. These are standard tests of 1000 V into 1 MΩ with a duty cycle of 5 seconds on and 25 seconds off.
IP rating IP40