Fluke 116 HVAC Multimeter with Temperature & Microamps, 600V

Order # 65161MM | Mfg # 2538803

Save 20%

$274.99

$219.99

In stock

Ships Free Over $100

Check out Transcat's Fluke Digital Multimeter Selection Guide!

Tariff fees or manufacture imposed surcharges may be applicable.

This product is available for shipping to the United States, Canada, and Puerto Rico only.

Overview

Everything You Need in an HVAC Meter

With the ability to take temperature and microamp measurements, the Fluke 116 Digital Multimeter has everything you need to help you quickly troubleshoot problems with HVAC equipment and flame sensors. The Fluke 116 measures resistance, continuity, frequency and capacitance. Fluke 116 multimeters are independently tested for safe use in CAT III 600 V Environments.

Product Highlights

Built in thermometer and temperature probe included for HVAC applications
Microamps to test flame sensors
LoZ: low input impedance to eliminate "ghost voltage" to make more accurate measurements
Large, white LED backlight to work in poorly lit areas
Compact ergonomic design for one-handed operation
Min/Max/Average to record signal fluctuations
Compatible with optional magnetic hanger (ToolPak™)
Resistance, continuity, frequency and capacitance
CAT III 600 V safety rated
TL75 Hard Point Test Lead Set

Each Unit Includes

TL75 Test leads
80BK Integrated Temperature probe
Holster
Installed 9 V battery
User manual

Webinars

Electrical Safety Measurement Webinar with Fluke

Technical Resources

Application - Troubleshooting Power Harmonics
Application - Who Sets the Rules for Electrical Testing and Safety
Fluke 116 Digital Multimeter - User's Manual
Fluke 116 Digital Multimeter - User's Manual Supplement
Fluke 116 Digital Multimeter - Technical Data
Fluke 114 / 115 / 116 / 117 Digital Multimeter - Calibration Information
Fluke 114 / 115 / 116 / 117 Digital Multimeter - Calibration Information Supplement
Fluke 114 / 115 / 116 / 117 Digital Multimeter - Specifications
Fluke 113 / 114 / 115 / 116 / 117 Digital Multimeter - CE Declaration of Conformity
Fluke 113 / 114 / 115 / 116 / 117 Digital Multimeter - CSA Certificate of Conformity
Fluke 113 / 114 / 115 / 116 / 117 Digital Multimeter - TUV SUD Certificate of Conformity
Brochure - Fluke 114 / 115 / 116 / 117 Digital Multimeter - Conversion Chart
Application - ABCs of Multimeter Safety: Multimeter Safety and You
Application - Everyday Troubleshooting with the Fluke 116 DMM
Fluke - Electrical Safety Measurement Webinar

Specifications

Specifications
Maximum voltage between any terminal and earth ground	600 V
Surge protection	6 kV peak per IEC 61010–1 600 VCAT III, Pollution Degree 2
Display	Digital: 6,000 counts, updates 4 per second
Bar graph	33 segments, updates 32 per second
Operating temperature	-10°C to + 50°C
Storage temperature	-40°C to + 60°C
Battery type	9 volt Alkaline, NEDA 1604A/ IEC 6LR61
Battery life	400 hours typical, without backlight
Accuracy Specifications
DC millivolts	Range/resolution	600.0 mV / 0.1 mV
	Accuracy	±([% of reading] + [counts]): 0.5% + 2
DC volts	Range/resolution	6.000 V / 0.001 V
		60.00 V / 0.01 V
		600.00 V / 0.1 V
	Accuracy	±([% of reading] + [counts]): 0.5% + 2
Auto volts	Range/resolution	600.0 V / 0.1 V
	Accuracy	2.0% + 3 (DC, 45 Hz to 500 Hz)
		4.0% + 3 (500 Hz to 1 kHz)
AC millivolts¹ True RMS	Range/resolution	600.0 mV / 0.1 mV
	Accuracy	1.0% + 3 (DC, 45 Hz to 500 Hz)
		2.0% + 3 (500 Hz to 1 kHz)
AC volts¹ True RMS	Range/resolution	6.000 V / 0.001 V
		60.00 V / 0.01 V
		600.0 V / 0.1 V
	Accuracy	1.0% + 3 (DC, 45 Hz to 500 Hz)
		2.0% + 3 (500 Hz to 1 kHz)
Continuity	Range/resolution	600 Ω / 1 Ω
	Accuracy	Beeper on < 20 Ω, off > 250 Ω detects opens or shorts of
		500 μs or longer.
Ohms	Range/resolution	600.0 Ω / 0.1 Ω
		6.000 kΩ / 0.001 kΩ
		60.00 kΩ / 0.01 kΩ
		600.0 kΩ / 0.1 kΩ
		6.000 MΩ / 0.001 MΩ
	Accuracy	0.9% + 1
	Range/Resolution	40.00 MΩ / 0.01 MΩ
	Accuracy	5% + 2
Diode Test	Range/resolution	2.00 V / 0.001 V
	Accuracy	0.9% + 2
Capacitance	Range/resolution	1000 nF / 1 nF
		10.00 μF / 0.01 μF
		100.0 μF / 0.1 μF
		9999 μF / 1 μF
		100 μF to 1000 μF
	Accuracy	1.9% + 2
	Range/resolution	> 1000 μF
	Accuracy	5% + 20%
Lo-Z Capacitance	Range	1 nF to 500 μF
	Accuracy	10% + 2 typical
Temperature²	Range/resolution	-40°C to 400°C / 0.1°C
(Type-K thermocouple)	Accuracy	1% + 10²
	Range/resolution	-40°F to 752°F / 0.2°F
	Accuracy	1% + 18²
AC μA true-rms (45 Hz to 500 Hz)	Range/resolution	600.0 μA / 0.1 μA
	Accuracy	1.5% + 3
DC μamps	Range/resolution	600.0 μA / 0.1 μA
	Accuracy	1.0% + 2
Hz (V or A input)²	Range/resolution	99.99 Hz / 0.01 Hz
		999.99 Hz / 0.1 Hz
		9.999 Hz / 0.001 Hz
		50.00 Hz / 0.01 Hz
	Accuracy	0.1% + 2
1. All AC voltage ranges except Auto-V/LoZ are specified from 1% to 100% of range. Auto-V/LoZ is specified from 0.0 V.
2. Temperature uncertainty (accuracy) does not include the error of the thermocouple probe.
3. Frequency is AC coupled, 5 Hz to 50 kHz for AC voltage. Frequency is DC coupled, 45 Hz to 5 kHz for AC current.
4. Temperature Range/Resolution: -40°F to 752°F / 0.2°F.
Mechanical and General Specifications
Size	167 x 84 x 46 mm (6.57 x 3.31 x 1.82 in)
Weight	550 g
Warranty	3 years

Visit our Fluke Digital Multimeter Selection Guide