US 
CAN - en Fluke 87-5
Industrial True RMS Multimeter with Temperature
Order #: FLUKE-87-5
Mfg #: 2074974
Special Price
$387.00
Regular Price
$429.99
Fluke 87-5
Industrial True RMS Multimeter with Temperature
Order #: FLUKE-87-5
Mfg #: 2074974
Special Price
$387.00
Regular Price
$429.99
Large Display digits and two-level bright white backlight for increased visibility.
Check out Transcat's Fluke Digital Multimeter Selection Guide!
Availability:
In stock
Available Promotions
Only need this item for a short time? Learn about rentals
Questions about this product? Speak to an expert
When productivity is on the line and you need to solve problems fast, the Fluke 87V multimeter delivers the accuracy and advanced troubleshooting capabilities you need. Designed specifically to handle complex signals, it takes the guesswork out of drive system troubleshooting—even in loud, high-energy, high-altitude locations. The full-featured 87V is well suited for most heavy industrial environments.
Fluke 87-5 Highlights
- Save over $125 with the Fluke 87-5 VIP Kit.
- Limited Time Offer.
- FREE TL5673A Heavy Duty Test Lead Kit
- FREE Ugly's Electrical References Book
- FREE C-101 Carrying Case
- FREE 32 Pack of Green Calibration Labels
- Fluke Model # 87-5
- Unique function for accurate voltage and frequency measurements on adjustable speed True-rms ac voltage and current for accurate measurements on non linear signals
- Built in thermometer conveniently allows you to take temperature readings without having to carry a separate instrument
- Motor drives and other electrically noisy equipment
- Measure up to 1000 V ac and dc
- Measure up to 10 A (20 A for 30 seconds)
- 10,000 uF capacitance range
- Frequency to 200 kHz and % duty cycle
- Peak capture to record transients as fast as 250 ìs
- 4½ digit mode
- Optional magnetic hanger for easy setup and viewing while freeing your hands for other tasks
- Large display digits and 2 level bright white backlight for increased visibility
- Withstands hazardous 8,000 volt spikes caused by load switching and faults on industrial circuits and complies with second edition IEC and ANSI electrical safety standards
- Improved sleep mode for long battery life
- Relative mode to remove test lead resistance from low ohms measurements
- Auto and manual ranging for maximum flexibility
Each Fluke 87-5 Includes
- C81Y yellow protective holster and Flex-Stand™
- 80BK K-Type Temperature Probe
- Users Manual
- 9V battery installed
- TL75 Hard Point™ Lead Set with AC70A Alligator Clips
Special Member Pricing
Buy with Calibration
Rental Instruments
Access to 100,000+ products
1,000's of instruments in stock
Product selection expertise
Application assistance
Purchase with a PO
-
SOFT CARRYING CASE FOR TDS210/ 220SOFT CARRYING CASE FOR TDS210/ 220Order #: AC220
Mfg #: AC220
Availability:Out of stockCall for price -
Silvertronic 129527Universal Test Probe Set
Order #: 65135MM
Mfg #: 129527
Availability: Item ships in about Ships in 2-3 weeksSpecial Price $42.00 Regular Price $44.05 -
Fluke I410AC/DC Clamp-on Current Probe, 400A
Order #: I-410
Mfg #: 617727
Availability:Out of stockSpecial Price $252.00 Regular Price $279.99 -
Special Price $32.00 Regular Price $34.99
-
Special Price $99.00 Regular Price $104.99
-
Special Price $36.00 Regular Price $39.99
-
Fluke TL220Industrial Test Lead Set for All Fluke Meters
Order #: TL20
Mfg #: 2003625
Availability:Out of stockSpecial Price $77.00 Regular Price $84.99 -
Special Price $43.00 Regular Price $46.99
-
Fluke TLK-225SureGrip Master Accessory Set
Order #: TLK225
Mfg #: 2097031
Availability:Out of stockSpecial Price $153.00 Regular Price $169.99 -
Fluke 80PK-26SureGrip Tapered Temperature Probe
Order #: 80PK-26
Mfg #: 2098714
Availability:Out of stockSpecial Price $113.00 Regular Price $124.99 -
Call for price
-
Fluke 80PK-8Probe Pipe Clamp, Temperature Probe
Order #: 80PK-8
Mfg #: 200360
Availability:Out of stockSpecial Price $171.00 Regular Price $189.99 -
Special Price $50.00 Regular Price $54.99
-
Fluke I-1010AC/DC Clamp-on Current Probe 600A/1000A
Order #: I-1010
Mfg #: 617735
Availability:Out of stockSpecial Price $392.00 Regular Price $434.99 -
Fluke I1010-KITAC/DC Current Clamp with Meter Carrying Case
Order #: I1010-KIT
Mfg #: 2096998
Availability: Item ships in about 2 - 3 WeeksSpecial Price $419.00 Regular Price $464.99 -
Fluke 80PK-22SureGrip Immersion Temperature Probe
Order #: 80PK-22
Mfg #: 2098684
Availability:Out of stockSpecial Price $99.00 Regular Price $109.99 -
Special Price $27.00 Regular Price $29.99
-
Special Price $30.00 Regular Price $32.99
-
Special Price $41.00 Regular Price $44.99
-
Fluke TL225SureGrip Stray Voltage Adapter Test Lead Kit
Order #: 80152TL
Mfg #: 2429268
Availability: Item ships in about Ships in 2-3 weeksSpecial Price $117.00 Regular Price $129.99 -
Fluke C345Soft Carrying Case, Polyester,Black/Yellow
Order #: C345
Mfg #: 3311173
Availability:Out of stockSpecial Price $89.00 Regular Price $94.99
| Specifications | ||
| Voltage DC | Maximum voltage | 1000 V |
| Accuracy | ±(0.05% + 1) | |
| Maximum resolution | 10 µV | |
| Voltage AC | Maximum voltage | 1000 V |
| Accuracy | ±(0.7% + 2) True RMS | |
| AC bandwidth | 20 kHz with low pass filter; 3 db @ 1 kHz | |
| Maximum resolution | 0.1 mV | |
| Current DC | Maximum amps | 10 A (20 A for 30 seconds maximum) |
| Amps accuracy | ±(0.2% + 2) | |
| Maximum resolution | 0.01 µA | |
| Current AC | Maximum amps | 10 A (20 A for 30 seconds maximum) |
| Amps accuracy | ±(1.0% + 2) True RMS | |
| Maximum resolution | 0.1 µA | |
| Resistance | Maximum resistance | 50 MΩ |
| Accuracy | ±(0.2% + 1) | |
| Maximum resolution | 0.1 Ω | |
| Capacitance | Maximum capacitance | 9,999 µF |
| accuracy | ±(1% + 2) | |
| Maximum resolution | 0.01 nF | |
| Frequency | Maximum frequency | 200 kHz |
| Accuracy | ±(0.005% + 1) | |
| Maximum resolution | 0.01 Hz | |
| Duty cycle | Maximum duty cycle | 99.90% |
| Accuracy | ±(0.2% per khz + 0.1%) | |
| Maximum resolution | 0.10% | |
| Temperature measurement | –200.0°C – 1090°C | |
| –328.0°F – 1994.0°F | ||
| excluding probe | ||
| 80 BK temperature probe | –40.0°C – 260°C | |
| –40.0°F – 500°F, 2.2°C or 2% whichever is greater | ||
| Conductance | Maximum conductance | 60.00 nS |
| Accuracy | ±(1.0% + 10) | |
| Maximum resolution | 0.01 nS | |
| Diode | Range | 3 V |
| Resolution | 1 mV | |
| Accuracy | ±(2% + 1) | |
| Duty cycle range | Accuracy | Within ±(0.2% per kHz + 0.1%) |
| Environmental Specifications | ||
| Operating temperature | –20°C to + 55°C | |
| Storage temperature | –40°C to + 60°C | |
| Humidity (without condensation) | 0% – 90% (0°C – 35°C) | |
| 0% – 70% (35°C – 55°C) | ||
| Operating Altitude | 2000 m | |
| Safety Specifications | ||
| Overvoltage category | EN 61010–1 to 1000 V CAT III, 600V CAT IV | |
| Agency approvals | UL, CSA, TÜV, VDE listed | |
| Mechanical and General Specifications | ||
| Size | 201 x 98 x 52 mm (with holster) | |
| Weight | 355 g | |
| 624 g – with holster | ||
| Display | Digital | 6000 counts updates 4/sec. |
| 19,999 counts in high–resolution mode | ||
| Analog | 32 segments, updates 40/sec | |
| Frequency | 19,999 counts, updates 3/sec at > 10 Hz | |
| Warranty | Lifetime | |
| Battery Life | Alkaline | ~400 hours typical, without backlight |
| Shock | 1 Meter drop per IEC 61010–1:2001 | |
| Vibration | Per MIL–PRF–28800 for a Class 2 instrument | |
Visit our Fluke Digital Multimeter Selection Guide
All products in this series
