Fluke 789 VIP KIT
Order #: 789E-VIP
Mfg #: FLUKE-789
Fluke 789 VIP KIT
Order #: 789E-VIP
Mfg #: FLUKE-789
Exclusive VIP Kit includes FREE ToolPak Strap & Magnet Hanging Kit , FREE Test Lead Set, FREE C-101 Carrying Case, and FREE 128 Pack of Green Calibration Labels . Save time and equipment costs with the combined meter and loop calibrator into the Fluke 789.
Only need this item for a short time? Learn about rentals
Overview
The Fluke 789 ProcessMeter is the ultimate troubleshooting tool for electricians and instrumentation professionals, combining the functionality of a loop calibrator with the power of a digital multimeter. By equipping the 789 with a temperature measurement module and the wireless data logging capabilities of Fluke Connect™ with ShareLive™ video call (sold separately), process technicians can now do a lot more while carrying a lot less. And with its built-in, selectable 250 ohm HART® resistor, it eliminates the need to carry a separate resistor with you.
Product Highlights
- Save over $180 with the Fluke 789 VIP Kit.
- Limited Time Offer.
- FREE ToolPak Strap & Magnet Hanging Kit
- FREE Test Lead Set
- FREE C-101 Carrying Case
- FREE 128 Pack of Green Calibration Labels
- 24 V loop power supply
- HART mode setting with loop power (adds 250 ohm resistor)
- 100% larger dual display
- 1200 ohm drive capability on mA source
- Enhanced backlight with two brightness settings
- Improved battery power with four AA batteries
- 0-100% mA Span Check buttons to toggle between 4 and 20 mA
- Infrared I/O serial port compatible with FlukeView Forms V 2.1 Software
- >5 V dc measurement capability on the 4 V dc range for precise 1-5 V measurements.
- Externally accessible fuses for easy replacement
- DMM designed to meet 1000 V IEC 1010 Cat III standards
- Precision 1000 V, 440 mA digital multimeter
- Measure ac and dc volts
- AC and dc voltage accuracy: 0.05 % dc current accuracy, 1 uA resolution to 30 mA
- Simultaneous mA and % of scale readout
- True-rms ac voltage measurement
- Frequency measurement to 20 kHz
- Min/Max/Average/Hold/Relative modes
- Diode Test and Continuity Beeper
- 20 mA dc current source / loop calibrator / simulator
- Simultaneous mA and % of scale readout
- Manual Step (100 %, 25 %, Coarse, Fine) plus Auto Step and Auto Ramp
- Externally accessible battery for easy battery changes
- V overload protection on V, ohms, frequency, mA (backed-up by 440 mA 1000 V fuse)
Each Unit Includes
- 789 ProcessMeter
- Basic test leads
- FREE Test Lead Kit - AC220 SureGrip™ Alligator Clip Set, TP220 SureGrip™ Test Probe Set, TL222 SureGrip™ Silicone Test Lead Set (right to right)
- FREE C-101 Transcat Case
- FREE TPAK80-4 Strap and Magnet
- FREE Calibration Labels
Special Member Pricing
Buy with Calibration
Rental Instruments
Access to 100,000+ products
1,000's of instruments in stock
Product selection expertise
Application assistance
Purchase with a PO
- Fluke TL220Industrial Test Lead Set for All Fluke Meters
Order #: TL20
Mfg #: 2003625
Availability:Out of stockSpecial Price $76.49 Regular Price $84.99 - Fluke C125Case for Fluke 120 Series ScopeMeters
Order #: C125
Mfg #: 646858
Availability:Out of stockSpecial Price $38.69 Regular Price $42.99 - Fluke I1010AC/DC Clamp-on Current Probe 600A/1000A
Order #: I-1010
Mfg #: 617735
Availability:Out of stockSpecial Price $395.99 Regular Price $439.99 - Fluke I410AC/DC Clamp-on Current Probe, 400A
Order #: I-410
Mfg #: 617727
Availability:Out of stockSpecial Price $251.99 Regular Price $279.99 - Fluke TP1Slim Reach Flat Blade Probe for Fluke Lead Sets
Order #: TP1E
Mfg #: 650887
Availability: Ships in 3-4 WeeksSpecial Price $20.69 Regular Price $22.99 - Fluke FVF-BASICFlukeview Forms Basic Software with Cable
Order #: FVF-BASIC
Mfg #: FVF-BASIC
Availability: Ships in 2-3 weeksSpecial Price $161.99 Regular Price $179.99 - Silvertronic 129527Universal Test Probe Set
Order #: 65135MM
Mfg #: 129527
Availability:Out of stockSpecial Price $41.84 Regular Price $44.05 - Fluke TLK-225SureGrip Master Accessory Set
Order #: TLK225
Mfg #: 2097031
Availability:Out of stockSpecial Price $152.99 Regular Price $169.99 - Fluke C1600Gear Box for Meter and Accessories
Order #: C1600
Mfg #: 2091049
Availability:Out of stockSpecial Price $77.39 Regular Price $85.99
Current measurement | Range | 0-1 A AC or DC |
Resolution | 1 mA | |
Accuracy | 0.2% + 2 LSD (DC) | |
Range | 0-30 mA | |
Resolution | 0.001 mA | |
Accuracy | 0.05% + 2 lSD | |
Current sourcing | Range | 0-20 mA or 4-20 mA |
Resolution | 0.05% of span | |
Drive capability | 24 V Compliance or 1200 Ω @ 20 mA | |
Frequency | to 19.999 kHz, 0.005% + 1 LSD | |
Continuity | Beeps for resistance < 100 Ω | |
Voltage measurement | Range | 0-1000 V AC (true-rms) or DC |
Resolution | 0.1 mV to 1.0 V | |
Accuracy | 0.1% Rdg + 1 LSD (VDC) | |
Resistance measurement | to 40 MΩ, 0.2% + 1 LSD | |
Diode test | 2.0 V shoes diode voltage drop | |
Display current and % of span | Yes | |
Auto Step, Auto Ramp | Yes | |
Environmental Specifications | ||
Operating temperature | -20°C to 55°C | |
Storage temperature | -40°C to 60°C | |
Humidity (without condensation) | 95% up to 30°C |