Fluke 789
Order #: 789E
Mfg #: 1633984
Fluke 789
Order #: 789E
Mfg #: 1633984
Ships FREE
Only need this item for a short time? Learn about rentals
Product Highlights
- 24 V loop power supply
- HART mode setting with loop power (adds 250 ohm resistor)
- 100% larger dual display
- 1200 ohm drive capability on mA source
- Enhanced backlight with two brightness settings
- Improved battery power with four AA batteries
- 0-100% mA Span Check buttons to toggle between 4 and 20 mA
- Infrared I/O serial port compatible with FlukeView Forms
- V 2.1 Software (available Feb. 2003)
- 5 V dc measurement capability on the 4 V dc range for precise 1-5 V measurements
- Externally accessible fuses for easy replacement
- DMM designed to meet 1000 V IEC 1010 Cat III standards
- Precision 1000 V, 440 mA digital multimeter
- Measure ac and dc volts
- AC and dc voltage accuracy: 0.05 % dc current accuracy, 1 uA resolution to 30 mA
- Simultaneous mA and % of scale readout
- True-rms ac voltage measurement
- Frequency measurement to 20 kHz
- Min/Max/Average/Hold/Relative modes
- Diode Test and Continuity Beeper
- 20 mA dc current source / loop calibrator / simulator
- Simultaneous mA and % of scale readout
- Manual Step (100 %, 25 %, Coarse, Fine) plus Auto Step and Auto Ramp
- Externally accessible battery for easy battery changes V overload protection on V, ohms, frequency, mA (backed-up by 440 mA 1000 V fuse)
- Process Meter
- Does Not Include calibration certificate
Each Unit Includes
- TL71 Premium Test Lead Set
- AC72 Alligator Clips
- Four AA alkaline batteries (installed)
- Users Manual
- Quick Reference Guide
- Fluke TP74Test Lead Accessory Set, Lantern Tip Test Probe,Red/Blk
Order #: TP74
Mfg #: 1541649
Availability:Out of stockSpecial Price $19.79 Regular Price $21.99 - Fluke TL935Patch Cord Kit (60,90,120cm)
Order #: TL935
Mfg #: 1616698
Availability: Item ships in about 1Special Price $53.99 Regular Price $59.99 - Fluke TL238SureGrip Test Lead Set for High Energy Environments
Order #: TL238
Mfg #: 2132831
Availability:Out of stockSpecial Price $76.49 Regular Price $84.99 - Fluke C125Case for Fluke 120 Series ScopeMeters
Order #: C125
Mfg #: 646858
Availability:Out of stockSpecial Price $37.07 Regular Price $39.99 - Fluke TL221Safety Silicone Lead Extension 1.5m
Order #: TL21E
Mfg #: 2003602
Availability:Out of stockSpecial Price $29.69 Regular Price $32.99 - Fluke 80T-150UAUniversal Temperature Probe
Order #: 80T-150UA
Mfg #: 80T-150UA
Availability:Out of stockSpecial Price $260.99 Regular Price $289.99 - Fluke C1600Gear Box for Meter and Accessories
Order #: C1600
Mfg #: 2091049
Availability:Out of stockSpecial Price $71.99 Regular Price $79.99 - Fluke 80PK-24SureGrip Air Temperature Probe
Order #: 80PK-24
Mfg #: 2098691
Availability:Out of stockSpecial Price $112.49 Regular Price $124.99 - Fluke TL762mm/4mm Probe & Silicone Test Lead Set
Order #: TL76
Mfg #: 2032684
Availability:Out of stockSpecial Price $35.99 Regular Price $39.99 - Silvertronic 129527Universal Test Probe Set
Order #: 65135MM
Mfg #: 129527
Availability: Item ships in about 1Special Price $29.28 Regular Price $30.83 - Fluke 80PK-26SureGrip Tapered Temperature Probe
Order #: 80PK-26
Mfg #: 2098714
Availability:Out of stockSpecial Price $112.49 Regular Price $124.99 - Fluke TLK-225SureGrip Master Accessory Set
Order #: TLK225
Mfg #: 2097031
Availability:Out of stockSpecial Price $152.99 Regular Price $169.99 - Fluke TL220Industrial Test Lead Set for All Fluke Meters
Order #: TL20
Mfg #: 2003625
Availability:Out of stockSpecial Price $76.49 Regular Price $84.99 - Fluke TL910Electronic Test Probes w/Replacement Tips
Order #: TL910
Mfg #: 1616632
Availability:Out of stockSpecial Price $67.49 Regular Price $74.99 - Fluke I200200A AC Clamp with Banana Jack
Order #: I-200
Mfg #: 664755
Availability: Item ships in about 1Special Price $148.49 Regular Price $164.99 - Fluke CXT80Rugged Pelican Hard Case
Order #: CXT80
Mfg #: 3352559
Availability: Item ships in about 1Special Price $197.99 Regular Price $219.99 - Fluke 80T-150UUNIVERSAL TEMPERATURE PROBE
Order #: 80T-150U
Mfg #: 80T-150U
Availability:Out of stockCall for price - Fluke TP38Slim-Reach Test Probe Set, Insulated
Order #: TP38
Mfg #: 1541636
Availability:Out of stockSpecial Price $19.79 Regular Price $21.99 - Fluke TL222SureGrip Silicone Right Angle Test Lead Set
Order #: TL22
Mfg #: 2003616
Availability:Out of stockSpecial Price $29.69 Regular Price $32.99 - Fluke BP980Double Banana Plug Kit
Order #: BP980
Mfg #: 1616807
Availability: Item ships in about 1Special Price $44.99 Regular Price $49.99 - Fluke 80K-15Electronic Air Cleaner Probe
Order #: 80K-15
Mfg #: 618113
Availability: Item ships in about 1Special Price $269.99 Regular Price $299.99 - Myron L Company TP1Conductivity/TDS/Temperature Meter,TechPro II
Order #: TP1
Mfg #: TP1
Availability:Out of stockSpecial Price $675.28 Regular Price $734.00 - Transcat 5353C-GCalibration Labels-Green, Self-Laminating, 1 3/4x5/8"
Order #: 5353C-G
Mfg #: CUSTOM QCC306-GR (QZ0530GR)
Availability:Out of stockSpecial Price $22.94 Regular Price $24.15
Specifications | ||
Current measurement | Range | 0-1 A AC or DC |
Resolution | 1 mA | |
Accuracy | 0.2% + 2 LSD (DC) | |
Range | 0-30 mA | |
Resolution | 0.001 mA | |
Accuracy | 0.05% + 2 lSD | |
Current sourcing | Range | 0-20 mA or 4-20 mA |
Resolution | 0.05% of span | |
Drive capability | 24 V Compliance or 1200 Ω @ 20 mA | |
Frequency | to 19.999 kHz, 0.005% + 1 LSD | |
Continuity | Beeps for resistance < 100 Ω | |
Voltage measurement | Range | 0-1000 V AC (true-rms) or DC |
Resolution | 0.1 mV to 1.0 V | |
Accuracy | 0.1% Rdg + 1 LSD (VDC) | |
Resistance measurement | to 40 MΩ, 0.2% + 1 LSD | |
Diode test | 2.0 V shoes diode voltage drop | |
Display current and % of span | Yes | |
Auto Step, Auto Ramp | Yes | |
Environmental Specifications | ||
Operating temperature | -20°C to 55°C | |
Storage temperature | -40°C to 60°C | |
Humidity (without condensation) | 95% up to 30°C | |
75% up to 40°C | ||
45% up to 50°C | ||
35% up to 55°C | ||
Temperature coefficient | 0.05 x (specified accuracy) per °C (for temperatures < 18°C or > 28°C) | |
Safety Specifications | ||
Electrical safety | Designed in accordance with IEC 1010-1, ANSI/ISA S82.01-1994 and CAN/CSA C22.2 No 1010.1-92 | |
Overvoltage category | IEC 1010-1 CAT III 1000 V | |
IEC 1010-1 CAT IV 600 V | ||
Maximum voltage | 1000 V RMS | |
Mechanical and General Specifications | ||
Size (H x W x L) | 50 x 100 x 203 mm (1.25 x 3.41 x 7.35 in) | |
Weight | 610 g (1.6 lbs) | |
Batteries | 4 AA alkaline batteries | |
Warranty | 3 years | |
Battery life | 140 hours typical (measurement), 10 hours typical (sourcing 20 mA) | |
Shock and vibration | Random, 2 g, 5-500 Hz | |
1 meter drop test |