Fluke 789 Process Meter, DMM & Loop Calibrator

Order # 789E | Mfg # 1633984

In Stock!

$1,444.99

In stock

Tariff fees or manufacture imposed surcharges may be applicable.

Overview

24 V loop power supply
HART mode setting with loop power (adds 250 ohm resistor)
100% larger dual display
1200 ohm drive capability on mA source
Enhanced backlight with two brightness settings
Improved battery power with four AA batteries
0-100% mA Span Check buttons to toggle between 4 and 20 mA
Infrared I/O serial port compatible with FlukeView Forms
V 2.1 Software (available Feb. 2003)
5 V dc measurement capability on the 4 V dc range for precise 1-5 V measurements
Externally accessible fuses for easy replacement
DMM designed to meet 1000 V IEC 1010 Cat III standards
Precision 1000 V, 440 mA digital multimeter
Measure ac and dc volts
AC and dc voltage accuracy: 0.05 % dc current accuracy, 1 uA resolution to 30 mA
Simultaneous mA and % of scale readout
True-rms ac voltage measurement
Frequency measurement to 20 kHz
Min/Max/Average/Hold/Relative modes
Diode Test and Continuity Beeper
20 mA dc current source / loop calibrator / simulator
Simultaneous mA and % of scale readout
Manual Step (100 %, 25 %, Coarse, Fine) plus Auto Step and Auto Ramp
Externally accessible battery for easy battery changes V overload protection on V, ohms, frequency, mA (backed-up by 440 mA 1000 V fuse)
Process Meter
Does Not Include calibration certificate

Application - Troubleshooting Power Harmonics
Application - Who Sets the Rules for Electrical Testing and Safety
Application - ABCs of Multimeter Safety: Multimeter Safety and You
Application - Fluke Connect™ ABCs of DMMs
Brochure - 7 Reasons to Connect Your Tools
Brochure - Fluke Connect™
Brochure - Oil and Gas Downstream
Brochure - Oil and Gas Midstream
Fluke 789 ProcessMeter™ - User's Manual
Fluke 789 ProcessMeter™ - Calibration Manual
Fluke 789 ProcessMeter™ - Quick Reference Guide
Fluke 789 ProcessMeter™ - Safety Sheet
Fluke 789 ProcessMeter™ - Safety Sheet Supplement
Fluke 789 ProcessMeter™ - CE Declaration of Conformity
Fluke 789 ProcessMeter™ - CSA Certificate of Conformity
Fluke 789 ProcessMeter™ - EMC Certificate of Conformity
Fluke 789 ProcessMeter™ - TUV SUD Certificate of Conformity
Fluke 787 / 789 ProcessMeter™ - Statement of Memory Volatility
Application - Fluke ProcessMeter Proves that Less can be More
Application - In-field Valve Positioner Checks Using the Fluke 789 ProcessMeter
Brochure - Fluke 789 ProcessMeter™

Current measurement	Range	0-1 A AC or DC
	Resolution	1 mA
	Accuracy	0.2% + 2 LSD (DC)
	Range	0-30 mA
	Resolution	0.001 mA
	Accuracy	0.05% + 2 lSD
Current sourcing	Range	0-20 mA or 4-20 mA
	Resolution	0.05% of span
	Drive capability	24 V Compliance or 1200 Ω @ 20 mA
Frequency	to 19.999 kHz, 0.005% + 1 LSD
Continuity	Beeps for resistance < 100 Ω
Voltage measurement	Range	0-1000 V AC (true-rms) or DC
	Resolution	0.1 mV to 1.0 V
	Accuracy	0.1% Rdg + 1 LSD (VDC)
Resistance measurement	to 40 MΩ, 0.2% + 1 LSD
Diode test	2.0 V shoes diode voltage drop
Display current and % of span	Yes
Auto Step, Auto Ramp	Yes
Environmental Specifications
Operating temperature	-20°C to 55°C
Storage temperature	-40°C to 60°C
Humidity (without condensation)	95% up to 30°C