Fluke 83-5 83V Digital Industrial Multimeter

Order # FLUKE-83-5 | Mfg # 2075004

$513.99

In stock

Ships Free Over $100

Large Display digits and two-level bright white backlight for increased visibility.

Tariff fees or manufacture imposed surcharges may be applicable.

This product is available for shipping to the United States, Canada, and Puerto Rico only.

Overview

Product Highlights

Fluke Model # 83-5
Optional magnetic hanger for easy setup and viewing while freeing your hands for other tasks
Large display digits and 2 level bright white backlight for increased visibility
Withstands hazardous 8,000 volt spikes caused by load switching and faults on industrial circuits and complies with second edition IEC and ANSI electrical safety standards
Improved sleep mode for long battery life
Relative mode to remove test lead resistance from low ohms measurements
Auto and manual ranging for maximum flexibility

Each Unit Includes

C81Y yellow protective holster and Flex-Stand™
Users Manual
9V battery installed
TL75 Hard Point™ Lead Set with AC70A Alligator Clips

Webinars

Electrical Safety Measurement Webinar with Fluke

Technical Resources

Fluke 80 Series V Industrial Multimeter - User's Manual
Fluke 80 Series V Industrial Multimeter - User's Manual Supplement
Fluke 80 Series V Industrial Multimeter - Calibration Manual
Fluke 80 Series V Industrial Multimeter - Calibration Manual Supplement
Fluke 80 Series V Industrial Multimeter - Safety Sheet
Fluke 80 Series V Industrial Multimeter - Quick Reference Guide
Fluke 80 Series V Industrial Multimeter - Statement of Memory Volatility
Fluke 80 Series V Industrial Multimeter - CSA Certificate of Conformity
Fluke 80 Series V Industrial Multimeter - EMC Certificate of Conformity
Fluke 80 Series V Industrial Multimeter - TUV SUD Certificate of Conformity
Application - Troubleshooting Power Harmonics
Application - Who Sets the Rules for Electrical Testing and Safety
Brochure - Add Wireless to your Fluke Digital Multimeter
Brochure - Fluke DMM Selection Guide
Brochure - Fluke 27II / 28II Sales Conversion Guide
Brochure - The New Standard for Rugged
Fluke 83V / 87V Digital Multimeter - Technical Data
Application - ABCs of DMMs: Multimeter Features and Functions Explained
Fluke - Electrical Safety Measurement Webinar

Specifications

Specifications
Voltage DC	Maximum voltage	1000 V
	Accuracy	±(0.1% + 1)
	Maximum resolution	100 µV
Voltage AC	Maximum voltage	1000 V
	Accuracy	±(0.5% + 2)
	Maximum resolution	0.1 mV
Current DC	Maximum amps	10 A (20 A for 30 seconds maximum)
	Amps accuracy	±(0.4% + 2)
	Maximum resolution	0.01 mA
Current AC	Maximum amps	10 A (20 A for 30 seconds maximum)
	Amps accuracy	±(1.2% + 2)
	Maximum resolution	0.1 µA
Resistance	Maximum resistance	50 MΩ
	Accuracy	±(0.4% + 1)
	Maximum resolution	0.1 Ω
Capacitance	Maximum capacitance	9,999 µF
	Accuracy	±(1% + 2)
	Maximum resolution	0.01 nF
Frequency	Maximum frequency	200 kHz
	Accuracy	±(0.005% + 1)
	Maximum resolution	0.01 Hz
Duty cycle	Maximum duty cycle	99.90%
	Accuracy	±(0.2% per khz + 0.1%)
	Maximum resolution	0.10%
Conductance	Maximum conductance	60.00 nS
	Accuracy	±(1.0% + 10)
	Maximum resolution	0.01 nS
Diode	Range	3 V
	Resolution	1 mV
	Accuracy	±(2% + 1)
Duty cycle range	Accuracy	within ±(0.2% per kHz + 0.1%)
Environmental Specifications
Operating temperature	–20°C to +55°C
Storage temperature	–40°C to +60°C
Humidity (without condensation)	0% – 90% (0°C – 35°C)
Humidity (without condensation)	0% – 70% (35°C – 55°C)
Operating altitude	2000 m
Safety Specifications
Overvoltage category	EN 61010–1 to 1000 V CAT III, 600V CAT IV
Agency approvals	CSA, TÜV
Mechanical and General Specifications
Display	Digital	6000 counts updates 4/sec
	Analog	32 segments, updates 40/sec
	Frequency	19,999 counts, updates 3/sec at > 10 Hz
Size	201 x 98 x 52 mm (with holster)
Weight	355 g
Weigh with holster and flex–stand	624 g
Warranty	Lifetime
Battery life	Alkaline~400 hours typical, without backlight
Shock	1 Meter drop per IEC 61010–1:2001
Vibration	Per MIL–PRF–28800 for a Class 2 instrument