Fluke I2000 FLEX Flex AC Current Clamp 20A, 200A & 2000A

Flex AC Current Clamp 20A, 200A & 2000A

Order #: I2000 FLEX

Mfg #: 2584912

Skip to the end of the images gallery

Skip to the beginning of the images gallery

Special Price $528.65 Regular Price $593.99

Availability: Ships in 4-6 weeks

Ships Free Over $100

Choose Your Options:

Add Calibration

Qty

Tariff fees or manufacture imposed surcharges may be applicable.

This product is available for shipping to the United States, Canada, and Puerto Rico only.

Product Overview

Product Highlights

The i2000 is an AC current probe utilizing the Rogowski principle. It can be used to measure currents up to 2000 A when used in conjunction with multimeters, recorders or data loggers. The flexible and lightweight measuring head allows quick and easy installation in hard to reach areas.

Three ranges: 20A, 200 A & 2000 A, 100 mV/A, 10 mV/A & 1 mV/A output
Ideal for current measurement on thick and hard to reach conductors without breaking the circuit
Maximum conductor diameter 178 mm
CAT III 600 V safety rating

Specifications

All products in this series

Fluke I3000 FLEX-4PK AC Current Probe, 4 pack, 3000A
AC Current Probe,4pk.

$2,222.99

View details

Save Item Compare
Fluke I6000S FLEX-36 AC Current Probe, 36", 6000A
AC Current Probe

$1,164.99

View details

Save Item Compare
Fluke I3000S-FLEX-24 AC Current Probe, 24", 3000A
AC Current Probe, 24", 3000A

Special Price $725.34 Regular Price $814.99

View details

Save Item Compare
Fluke I3000S FLEX-36 AC Current Probe, 36", 3000A
AC Current Probe

Special Price $825.02 Regular Price $926.99

View details

Save Item Compare
Fluke I6000S FLEX-24 AC Current Probe, 24", 6000A
AC Current Probe

$1,058.99

View details

Save Item Compare

Electrical specifications
Current ranges	20 A 200 A 2000 A AC rms
Output sensitivity (AC-coupled)	1 mV 10 mV 100 mV 1 mV per A
Load impedance	100 kΩ minimum
Accuracy	at +25°C ±1% of range (45 Hz to 65 Hz)
Linearity	10% to 100% of range ±0.2% of reading
Noise	8 mV AC rms (30 A) 2 mV AC rms (300 A, 3000 A)
Frequency range	10 Hz to 20 kHz (-3 dB)
Phase error	< ±1° (45 Hz to 65 Hz) ±10° (at 20 kHz)
Position sensitivity	with cable > 25 mm from the coupling ±2% of range
External field	with cable > 200 mm from the head ±1% of range
Power supply	2 x AA/MN 1500/LR6 Alkaline, 200 hours, low battery indicator
Temperature Coefficient	±0.08% of reading per °C
Working voltage	see Safety standards section 600 V AC rms or DC
General Specifications
Head Circumference	610 mm (24 in)
Head cable diameter	14.3 mm (0.56 in)
Head bend radius	38.1 mm (1.5 in)
Cable length (head to electronics)	2 m (6.56 ft)
Output connection	Molded 4 mm safety plugs (not integrated)
Operating temperature range	0°C to +70°C (32°F to 158°F) (head and electronics)
Storage temperature range	-40°C to +105°C (-40°F to 221°F) (head) -20°C to +85°C (-4°F to 185°F) (electronics)
Operating humidity	15% to 85% (non-condensing)
Weight	180 g (6.34 oz) (head) 190 g (6.70 oz) (electronics)
Safety standards	EN 61010-031: 2002 EN 61010-2-032: 2002 EN 61010-1: 2001 600 Vrms, Category III, Pollution Degree 2 Use of the probe on uninsulated conductors is limited to 600 V ac rms or dc and frequencies below 1 kHz.
EMC standards	EN 61326: 1998 +A1, A2, and A3
Dimensions (H x W x D)	116 x 68.5 x 30 mm (4.56 x 2.69 x 1.18 in)

Fluke I2000 FLEX Flex AC Current Clamp 20A, 200A & 2000A

Choose Your Options:

Product Highlights

TRANSCAT, INC

CUSTOMER SERVICE