Fluke 773 VIP Kit

Fluke 773 w/Pelican 1450 Case & Fluke Voltage Detector

Order #: 773-VIP

Mfg #: FLUKE-773

Questions about availability or need help? Contact Us:

(800) 633-0561
$1,675.99

Fluke 773 VIP Kit

Fluke 773 w/Pelican 1450 Case & Fluke Voltage Detector

Order #: 773-VIP

Mfg #: FLUKE-773

$1,675.99
You don't have to break the loop to make 4-20 mA signal measurements. Exclusive VIP Kit includes FREE Pelican 1450-C Hard case (15" x 10.5" x 6"), Black and DC Voltage Detector, 6-50 VDC.
Availability:
In stock
Available Promotions

Choose Your Options:

Add Calibration

You have chosen to add the following Calibration Services to Your Order

Make sure your instrument is calibrated and ready to use the minute you open the box by adding our expert calibration service. Why Calibrate? For a complete descriptions of Transcat Service Levels, click here.

Already have this this item and need calibration? Request a calibration quote

This product is available for shipping to the United States and Puerto Rico only.

Only need this item for a short time? Learn about rentals

Questions about this product? Speak to an expert

Product Highlights

  • FREE Pelican 1450-C Hard case (15" x 10.5" x 6"), Black and DC Voltage Detector, 6-50 VDC - Exclusively from Transcat with purchase of a 773-VIP

Overview

Need more hours in your day?

Save time by NOT breaking the loop on 4-20 mA signal measurements.

Are you spending time:

  • Taking mA measurements by removing a wire and breaking the loop
  • Calling the control room to isolate a loop
  • Testing analog input/output on a console
  • Troubleshooting devices with mA inputs and outputs
  • Repairing intermittent or erratic 4-20 mA loops
  • Going back to the shop to get extra tools

If you need more time in your busy day take a good look at the Fluke 773 mA Clamp Meters. It's designed to save you time, and money, by eliminating time wasting activities. Now you can troubleshoot and repair 4-20 mA loops without breaking the loop or bringing down the system.

Features

  • Best in class 0.2 % accuracy
  • 0.01 mA resolution and sensitivity
  • Measure 4 to 20 mA signals without "breaking the loop"
  • Measure mA signals for PLC and control system analog I/O
  • Dual backlit display with both mA measurement and percent of 4 to 20 mA span
  • Measurement Spotlight illuminates hard to see wires in dark enclosures
  • Detachable clamp with extension cable for measurements in tight locations
  • Measure 10 to 50 mA signals in older control systems using the 99.9 mA range
  • Automatically change the 4 to 20 mA output for remote testing
  • Power saving features, auto-off, backlight timeout extend battery life
  • Hold function captures and displays changing measurements
  • Measure 4 to 20 mA signals with in-circuit measurement
  • Simultaneous mA in-circuit measurement with 24V loop power for powering and testing transmitters
  • Source 4 to 20 mA signals for testing control system I/O or I/Ps
  • mA output linear ramp or 25% step output
  • DC voltage measurement to verify 24V power supplies or voltage I/O signals
  • Source DC voltage to test input devices that accept a 1-5V or 0 to 10V signals
  • Scaled mA output provides a continuous mA signal that corresponds to the 4 to 20 mA signal measured by the mA clamp
  • mA in/out: simultaneously measure the mA signal with the clamp and source a mA signal
  • Voltage output linear ramp or 25% step output
  • Each Unit Includes

    • FREE 1450-C Case
    • FREE DC Voltage Detector
    • Soft carrying case
    • Test leads
    • Alligator clips
    • Hanging strap
    • User's manual

    Webinars

    Electrical Safety Measurement Webinar with Fluke

    Special Member Pricing
    Buy with Calibration
    Rental Instruments
    Access to 100,000+ products
    1,000's of instruments in stock
    Product selection expertise
    Application assistance
    Purchase with a PO

    Specifications
    Diameter of measurable conductor 0.177" or 4.5 mm max
    Operating temperature -10 to 50ºC
    Storage temperature -25 to 60ºC
    Operating humidity < 90% @ <30ºC, < 75% @ 30 to 55ºC
    Operating altitude 0 to 2000 m
    IP rating IP 40
    Size 44 x 70 x 246 mm (2 7/8 x 5 ¾ x 11 5/8 in)
    Weight 410 g, (14.4 oz)
    Vibration Random 2 g, 5 to 500 Hz
    Shock 1 meter drop test (except the jaw)
    EMI/RFI Meets EN61326-1 
    For current measurement w/ JAW, add 1mA to specification for EMC field strengths of 1V/m up to 3V/m.
    Temperature coefficient 0.01% ºC 
    (< 18ºC or > 28ºC)
    Power, battery life (4) AA 1.5 V Alkaline, IEC LR6, 12 hours in mA source into 500 ohms
    Warranty Three years for electronics 
    One year for cable and clamp assembly
    Functional Specifications
    mA measurement  Resolution / range 0 to 20.99 mA
    (measured by clamp) Accuracy 0.2% + 2 counts
      Resolution / range 21.0mA to 100.0 mA
      Accuracy 1% + 5 counts
    mA measurement (measured in series with test jacks) Resolution / range 0 to 24.00 mA
    Accuracy 0.2% + 2 counts
    mA source (maximum mA drive: 24 mA into 1,000 ohms) Resolution / range 0 to 24.00 mA
    Accuracy 0.2% + 2 counts
    mA simulate (maximum voltage 50 V dc) Resolution / range 0 to 24.00 mA
    Accuracy 0.2% + 2 counts
    Voltage source (2 mA maximum drive current) Resolution / range 0 to 10.00 V DC
    Accuracy 0.2% + 2 counts
    Voltage measure Resolution / range 0 to 30.00 V DC
    Accuracy 0.2% + 2 counts


    Visit our Fluke Loop Calibrator Selection Guide

    All products in this series