Emerson TREXLFPKLWS3
Device Communicator PLUS w/HART & FieldbusIS,Wireless, 3yr Std

Order #: TREXLFPKLWS3

Mfg #: TREXLFPKLWS3

Questions about availability or need help? Contact Us:

(800) 633-0561
$12,532.00

Emerson TREXLFPKLWS3

Device Communicator PLUS w/HART & FieldbusIS,Wireless, 3yr Std

Order #: TREXLFPKLWS3

Mfg #: TREXLFPKLWS3

$12,532.00
Have trouble finding what you're looking for? Configure your TREX Now!

Availability: Call for availability
This item is available as RENTAL at
Call for price
Shop now
Questions about this product? Speak to an expert

Emerson TREX Highlights

  • L - Device Communicator Plus communication module - Includes additional Lead Set with connectors.
  • F - HART + Foundation Fieldbus Applications - Includes Foundation Fieldbus Power Plug when ordered with Device Communicator Plus communication module (L).
  • P - Rechargeable Li-Ion Power Module
  • KL - ATEX, CSA (US/Canada) and IECEx Intrinsically Safe (includes FISCO as applicable)
  • W - Wireless - Includes Bluetooth, WiFi, and NFC radios. Available only in countries where spectrum approval has been obtained.
  • S3 - Standard Support (3 Year) - Includes technical support and software updates.
  • Quickly fix issues in the field with advanced device diagnostics
  • Configure and test valves inline
  • Improve efficiency with a modern, intuitive user interface
  • Software updates can be downloaded. See PDF in the technical resources tab for more information
Device Communicator Plus Communication Module
  • HART terminal
  • Enables HART device communication
  • HART + power terminal
  • Enables HART communication with the Trex unit, and provides power to one HART device in a bench setup.
  • Connectors: Two Banana Jack Plugs
  • Includes HART power supply, resistors (167 Ohm), current control, and ammeter
  • Current Range: 3 -22.5 mA
  • mA terminal (external ammeter)
  • Measures current on a 4-20 mA current loop.
  • Current Range: Up to 22.5 mA
  • Resolution: 0.1 mA
  • Fieldbus (FF) terminal
  • Enables Foundation Fieldbus device communication
  • FF + FF pwr terminal
  • Provides power to one Foundation Fieldbus device in a bench setup.
  • Connector: One Banana Jack Plug (Power conditioner included)
  • Current Range: 0- 38 mA

Special Member Pricing
Buy with Calibration
Rental Instruments
Access to 100,000+ products
1,000's of instruments in stock
Product selection expertise
Application assistance
Purchase with a PO

Processor, Memory, and Operating System
Microprocessor 800 MHz ARM Cortex A8 / NXP
Memory Internal Flash 2 GB NAND and 32 GB extended flash
Operating System Windows Embedded Compact 2013
RAM 512 MB DDR3 SDRAM
Physical
Weight Approximately 2.9 lbs (1330 grams)
Display 5.7 inch (14.5 cm) color VGA resistive touchscreen
Keypad X button – similar to a Back key

Cables included with U.S., Europe, and U.K. plugs

Power Supply / Charger
Battery Rechargeable Lithium-Ion power module
Battery Operating Time 8+ hours of typical use
Charge Time 3 to 4 hours
LEDs 6 LEDs. Five LEDs for indicating the progress of charging. One LED to indicate the AC adapter is charging the power module.
Battery Charger Options Input voltage 90-264 VAC, 47-63 Hz
Connections
USB Micro USB Connector. USB 2.0
Remove the USB cable from the Trex unit before connecting to a device.
Battery Charger Barrel Round Plug Tip

>

Wireless
Wireless Approvals FCC, CE, RED and IC Approvals, Certified for use in over 100 countries
Bluetooth 2.1, Range up to 10 m
Wi-Fi 802.11 b/g, Range up to 33 m
NFC Active NFC, Range up to 20 cm
Communication Modules
Device Communicator Communication Module HART terminal Enables HART device communication
Connectors: Two Banana Jack Plugs
Optional Internal Resistor: 250 or 500 Ohm
Fieldbus (FF) terminal Foundation Fieldbus device communication
Connectors: Two Banana Jack Plugs
Device Communicator Plus Communication Module HART terminal, Enables HART device communication
HART + power terminal Enables HART communication with the Trex unit, and provides power to one HART device in a bench setup.
Connectors: Two Banana Jack Plugs Includes HART power supply, resistors (167 Ohm), current control, and ammeter. Current Range: 3 -22.5 mA
mA terminal (external ammeter)
Measures current on a 4-20 mA current loop.Connectors: Two Banana Jack Plugs. Current Range: Up to 22.5 mA. Resolution: 0.1 mA
Fieldbus (FF) terminal
Enables Foundation Fieldbus device communication. Connectors: Two Banana Jack Plugs
FF + FF power terminal
Provides power to one Foundation Fieldbus device in a bench setup. Connector: One Banana Jack Plug (Power conditioner included). Current Range: 0- 38 mA
Environmental
Usage -20°C to +55°C (-4°F to 131°F). For IS approval: -20°C to +50°C (-4°F to 122°F)
Charge +10°C to +45°C (50°F to 113°F)
Storage with power module -20°C to +50°C (-4°F to 122°F) (less than 1 month)
Storage without power module -20°C to +60°C (-4 °F to 140°F)
Enclosure Rating IP54
Shock The unit shall survive a 1-meter, all sides and corners drop test onto concrete.
Upgrade Studio Requirements
Installation Windows 7 Professional Service Pack (SP1) 1 (32 and 64-bit)
Windows 10 Professional
512 MB of free disk space
A Windows user account with Administrator privileges
All products in this series