Fluke Calibration 5628-12-L

Product Highlights

• Range to 660°C
• Meets all ITS-90 reMeets all ITS-90 requirements for resistance ratios
• Rtp drift < 20mK after 500 hours at 660°C
• Strain-free sensor design by Hart's SPRT engineers
• High-temp PRT, 25.5 Ohm, 305 mm (12 in)
• If you're using block calibrators, furnaces, or temperature points above normal PRT temperatures (420 °C), then these two PRTs are for you
• The 5626 is nominally 100ohms and the 5628 is nominally 25.5 Ohms
• Both instruments have a temperature range of -200 °C to 661 °C
• They make great working or check standards for calibration work up to the aluminum point
• Using a regular PRT at temperatures above 500°C exposes the platinum to contamination
• If the PRT is used as a reference or calibration standard, contamination is a major problem
• SPRTs, which are more expensive and delicate, can handle the higher temperatures, but with greater risk to the instrument due to shock, contamination, or mishandling
• The 5626 and 5628 are designed to reduce the contamination risk through the use of internal protection while not impairing performance

Webinars

Automating and Documenting Temperature Calibration Webinar with Fluke Calibration

Differential Pressure Meter Gas Custody Transfer Calibration Webinar with Fluke