Tektronix MSO24-2-BW-200 Mixed Signal Oscilloscope: 4 Analog Channel, 2.5GS/s, 10Mpts, 200MHz

Blade Runner: 2049 - Deckard's Blaster Technical Mat

Okay, there's way too many people displaying their gear on oven mitts, doilies, tablecloths, bare surfaces, etc. Team Paragon to the rescue! Protect your stuff and the surfaces you're otherwise working on!

While these are primarily intended as a great display option, they can actually be used as hobby or project mats!

Each officially licensed mat measures 12" x 17" and is 3mm thick. Manufactured in the United States of natural vulcanized rubber w/ non-slip base. Dye sublimation is resistant to oils, solvents and chemicals.

Note: This is a 'fantasy' technical mat. It is not intended to serve as a schematic by which one may tear down their replica. It's made for display or to otherwise serve as a protective service on which to work, build or just be creative.

Blaster Replica not included

Another awesome Blade Runner collectible, proudly brought to you by Popcultcha! Check out our full Blade Runner collection here.

Blade Runner: 2049 - Deckard's Blaster Water Gun 1:1 Scale Life-Size Action Model

The prop makers at Paragon FX Group are proud to announce their 1:1 Deckard's Blaster Water Gun Life-Size Action Model. Cast directly from our Elite replica, this full-size water blaster includes imitation red and green LEDs (5 red rhinestones & 2 green cast tips) for optional customisation. Each Blaster ships on art card within blister packaging.

This limited edition piece will see a one-time production run from Paragon of 3000 units. 

*Stand not included*

Another awesome Blade Runner collectible, proudly brought to you by Popcultcha! Check out our full Blade Runner collection here.

Blade Runner 2049 - K's Spinner 3.5" Scaled Die-Cast Vehicle Replica

Popcultcha Pre-Order Price Promise: Don't miss your chance to secure this item for your collection at our limited time only special pre-order price!

Threezero proudly introduces K's Spinner, the follow-up to the first release in the series, the Police Spinner of Rick Deckard, from Blade Runner 2049!

K, an officer with the Los Angeles Police Department, unearths a secret that could create chaos. He goes in search of a former blade runner who has been missing for over three decades.

K's Spinner measures approximately 3.7 inches (9.4 cm) in length and features a die-cast zinc alloy chassis that enhances structural integrity and adds heft to the vehicle. It boasts a matte black finish, scissor doors, and a three-wheel configuration. K's Spinner is equipped with three different types of engines: a combustion engine, a jet engine, and an anti-gravity engine. The retractable rear wheel design faithfully reproduces how the Spinner's wheels are stowed during take-off, as seen in the movie.

PRODUCT FEATURES:

• 3.70 inches long (9.40cm)
• Made of ABS, PVC, POM, and Zinc Alloy
• Based on the Blade Runner 2049 movie
• Highly detailed
• Features scissor-style doors and retractable rear wheel
• Officially licensed

Proudly brought to you by Popcultcha, Australia's largest and most comprehensive online store for action figures. CLICK HERE to see our full range of action figures.

Blade Runner: 2049 - Deckard’s Police Spinner 3.7" Vehicle Replica

Popcultcha Pre-Order Price Promise: Don't miss your chance to secure this item for your collection at our limited time only special pre-order price!

The highly-anticipated, long-awaited Blade Runner sequel; Blade Runner: 2049 won over fans of the classic sci fi epic, introducing audiences a new cast of characters in the Blade Runner universe.

Threezero is venturing into the production of small-scale vehicles, debuting with the absolutely iconic Rick Deckard’s Police Spinner from the classic noir sci-fi movie sequel, Blade Runner 2049!

Deckard’s Police Spinner is 3.7 inches long, with a die-cast zinc alloy chassis. The solid construction not only adds a substantial feel to the compact body, but also enhances the overall strength of the product. The vehicle’s exterior features the police markings as seen in the film, with threezero’s signature weathering paint effect to authentically recreate the look of a vehicle that has endured the ravages of rain, pollution, and time while Deckard is in hiding in the harsh future environment.

The vehicle’s two scissor-style doors can open vertically, revealing the intricate details of the cockpit interior. The two front wheels are retractable, and the front wheel covers on the sides can rotate 90 degrees to recreate the Spinner’s iconic flight-mode capabilities. All four wheels are fully functional and can turn.

An absolute must for any Blade Runner fan!

Another awesome Blade Runner collectible, proudly brought to you by Popcultcha! Check out our full Blade Runner collection here.

Blade Runner: 2049 - Series 2 7” Action Figures (Set of 2)

The highly-anticipated, long-awaited Blade Runner sequel; Blade Runner: 2049 won over fans of the classic sci fi epic, introducing audiences a new cast of characters in the Blade Runner universe.

The film follows the story of a new Blade Runner, LAPD Officer K, discovers a dark secret that could bring an end to humanity. The discovery leads him to Rick Deckard, a former blade runner who disappeared thirty years ago.

Standing 18cm tall, these fully-articulated figures feature Wallace, a manipulative replicant manufacturer, as well as Luv, Wallace's right-hand woman who is also a Nexus-9 model Replicant.

An absolute must for any Blade Runner fan!

Proudly brought to you by Popcultcha, Australia's largest and most comprehensive Blade Runner online store. CLICK HERE to see more great Blade Runner products.

Blade Runner: 2049 - The Spinner Emblem 1:1 Scale Life-Size Prop Replica

The Spinner: A flying vehicle used by the LAPD, The Spinner is capable of air and ground travel. The two seated vehicle utilizes vertical lift for take-off and landing.

Spinner's are adorned with a manufacturer's logotype denoting the model. The emblem can be seen between the caution graphic and the 995 sign on the vehicle.

As Deckard is found in 2049 his (earlier model) Spinner is seen parked at his residence and ultimately destroyed during Luv's arrival.

Having used an original emblem as reference, Paragon FX Group has recreated this iconic emblem in chromed metal.

This 1:1 (full-size) replica has the heft and feel of what one would imagine an actual Spinner badge would feel like. This piece is also magnetic, allowing it to be displayed on any number of surfaces.

Each limited-edition replica ships in custom box with laser cut foam.

NOTE: While magnetic, this item is not intended to be attached to any vehicle.

Another awesome Blade Runner collectible, proudly brought to you by Popcultcha! Check out our full Blade Runner collection here.

Blade Runner: 2049 - Wallace 7” Action Figure (Series 2)

The highly-anticipated, long-awaited Blade Runner sequel; Blade Runner: 2049 won over fans of the classic sci fi epic, introducing audiences a new cast of characters in the Blade Runner universe.

The film follows the story of a new Blade Runner, LAPD Officer K, discovers a dark secret that could bring an end to humanity. The discovery leads him to Rick Deckard, a former blade runner who disappeared thirty years ago.

Standing 18cm tall, this fully-articulated figure features Neander Wallace, a manipulative replicant manufacturer played by Jared Leto in the film.

An absolute must for any Blade Runner fan!

Proudly brought to you by Popcultcha, Australia's largest and most comprehensive Blade Runner online store. CLICK HERE to see more great Blade Runner products.

Blade Runner: 2049 - Luv 7” Action Figure (Series 2)

The highly-anticipated, long-awaited Blade Runner sequel; Blade Runner: 2049 won over fans of the classic sci fi epic, introducing audiences a new cast of characters in the Blade Runner universe.

The film follows the story of a new Blade Runner, LAPD Officer K, discovers a dark secret that could bring an end to humanity. The discovery leads him to Rick Deckard, a former blade runner who disappeared thirty years ago.

Standing 18cm tall, this fully-articulated figure features Luv, Wallace's right-hand woman who is also a Nexus-9 model Replicant.

An absolute must for any Blade Runner fan!

Proudly brought to you by Popcultcha, Australia's largest and most comprehensive Blade Runner online store. CLICK HERE to see more great Blade Runner products.

The Transformers (1984) - Optimus Prime AMK Series 8" Articulated Model Kit

Bring home the legendary leader of the Autobots with The Transformers (1984) - Optimus Prime AMK Series 8" Articulated Model Kit! Featuring 38 pre-assembled parts that are easy to snap together, this model perfectly captures Optimus Prime’s iconic look with lifelike detail straight from the classic movie.

Equipped with his Ion Blaster and Energon-Axe, this articulated figure is ready for action-packed display. The kit also includes a dynamic backdrop with an insert card, plus a base and stand, making it the ultimate collectible for any Transformers fan.

Contents:

• AMK body
• 1 x Ion Blaster
• 1 x Energon-Axe
• Backdrop (with background insert card) + Base + Stand

Proudly brought to you by Popcultcha, Australia's largest and most comprehensive Transformers online store. Click here to see the full range of our merchandise.

The Transformers (1984) - Megatron AMK PRO Series 8" Articulated Model Kit

Get ready to relive the epic battles of Transformers G1 with the YOLOPARK AMK series Megatron figure! With ABS plastic construction, this figure perfectly captures the ruthless nature of the Decepticon leader. Equipped with plenty of weapons, you can recreate all your favorite Megatron moments. Standing at 20cm tall, this figure will be an iconic piece in your collection.

Contents:

• AMK body
• 1 x Rail Cannon
• 1 x Rapid Firing Blaster
• 1 x Energon Sword
• 1 x Energon Mace
• Backdrop (with background insert card) + Base + Stand

Proudly brought to you by Popcultcha, Australia's largest and most comprehensive Transformers online store. Click here to see the full range of our merchandise.