Dwyer Instruments 160-168
Stainless Steel Pitot Tube 5/16" diameter, 168" length

Order #: 160-168

Mfg #: 160-168

Questions about availability or need help? Contact Us:

(800) 633-0561

Dwyer Instruments 160-168

Stainless Steel Pitot Tube 5/16" diameter, 168" length

Order #: 160-168

Mfg #: 160-168

Ideal for use with our precision manometers and air velocity gages, Dwyer Pitot Tubes are constructed from corrosion resistant stainless steel for a lifetime of service. ASME design meets AMCA and ASHRAE specifications for maximum accuracy over a wide variety of flow conditions. No correction factors required as ASHRAE tip design yields a calibration factor of 1. ASHRAE design needs no calibration! Permanent, stamped insertion depth graduations on sides of 160 series facilitate accurate positioning. Static pressure port is parallel to sensing tube allowing quick, easy alignment of tube with air flow. Low sensitivity to misalignment gives accurate reading even when tube is misaligned up to 15 degrees. Various standard sizes are available for use in ducts as small as 4" diameter or as large as 36 ft. dia. A universal model fits user supplied 3/4" schedule 40 (standard) pipe in any length. Several convenient mounting options are available for permanent installations.
Availability: Ships in 3-4 weeks

Choose Your Options:

Add Calibration

You have chosen to add the following Calibration Services to Your Order

Make sure your instrument is calibrated and ready to use the minute you open the box by adding our expert calibration service. Why Calibrate? For a complete descriptions of Transcat Service Levels, click here.

Already have this this item and need calibration? Request a calibration quote

This product is available for shipping to the United States and Canada only.

Only need this item for a short time? Learn about rentals

Questions about this product? Speak to an expert

Product Highlights

  • No calibration needed
  • Precisely located, burr-free static pressure holes
  • Hemispherical tip design, best for accuracy if imperfectly aligned and nearly impossible to damage
  • Long lasting 304 stainless steel construction
  • Silver soldered connections for leak-proof operation
  • ASME design meets AMCA and ASHRAE specification
  • Coefficient of "1
  • 5/16" models rated to 1500 F
  • Extended static connection helps guide tip within recommended 15 degrees of air flow direction
  • Inch graduations on sides of 160 series to quickly determine exact insertion depth
  • Dwyer Air Velocity Calculator, direct reading flow charts and instructions included
  • Use 1/8" models in ducts as small as 4", 5/16" models in ducts 10" or larger
  • Optional mounting gland or split flange make permanent installation fast and simple
  • 5/16" diameter
  • 168" insertion length

Special Member Pricing
Buy with Calibration
Rental Instruments
Access to 100,000+ products
1,000's of instruments in stock
Product selection expertise
Application assistance
Purchase with a PO

All products in this series