Additel ADT920-N Pneumatic Calibration Pump, -14 to 3000 psi, 1/4NPT F Connector

Order # ADT920-N | Mfg # ADT920-N
$6,650.00
Also Available:
arrow_drop_down

Tariff fees or manufacture imposed surcharges may be applicable.

This product is available for shipping to the United States, Canada, and Puerto Rico only.

Overview

Product Highlights

The 920 and 920HV High Pressure Test Pumps are hand operated pressure pumps designed to generate pressure from 95% vacuum to 3,000psi (200bar). With a long lever, it just takes 40 seconds to reach 3,000 psi (200 bar). A high-quality screw press is designed for fine pressure adjustment, with an adjustment resolution up to 10 Pa (0.1 mbar). A specially designed shut-off valve makes the pressure as stable as possible during calibration. A built-in gas-liquid isolator protects the pump from moisture and dirt to reduce the need for maintenance. The residual liquid in the pump introduced from devices under test will be pushed out and collected during pressure release. Two hand-tight quick connectors installed on the pump allow easy connecting and disconnecting to the test pump without the need for PTFE tape or wrenches. The 920 and 920HV are ideal comparison test pumps for pressure instrument calibrations.

  • Pressure Port: 1/4NPT female
  • High Efficiency: Generate 3,000 psi (200 bar) in 40 seconds.
  • Adjustment Resolution: 0.001 psi (10 Pa, 0.1 mbar). High-quality screw press for fine pressure adjustment.
  • Great Stability: A specially designed shut-off valve makes the pressure as stable as possible during calibration.
  • Durable and Minimal Maintenance: Built-in gas-liquid isolator protects the pump from moisture and dirt. The residual liquid in the pump introduced from devices under test will be collected and then pushed out and collected during pressure release. Anticorrosive and wear resistant material are used to improve the reliability further.
  • Hand-tight Quick Connectors: Allows easy connecting and disconnecting to the test pump without the need for PTFE tape or wrenches.
  • High-quality screw press for fine pressure adjustment
  • A specially designed bypass valve makes the pressure as stable as possible during calibration
  • Built-in gas-liquid isolator protects the pump from moisture and dirt
  • The residual liquid in the pump introduced from devices under test will be collected and blown out during pressure release
  • Anticorrosive and wear resistant materials are used to improve reliability
  • Allows easy connecting and disconnecting to the test pump without the use of PTFE tape or wrenches

Each Unit Includes

  • 20 O-rings
  • Manual

Technical Resources

Additel ADT920-N Pneumatic Calibration Pump, -14 to 3000 psi, 1/4NPT F Connector Accessories

checkbox-empty
Select
Additel ADT102-B2 1/2 BSP Male to Various Male and Female Connectors
checkbox-empty
Select
Additel ADT102 Adapter & Fitting, 1/4" NPTM to Various M/F Connections (26pc)
checkbox-empty
Select
Additel ADT920-MK Maintenance Kit for Additel 920 Pump
checkbox-empty
Select
Additel 9909-920 Carrying case for ADT920 and two Gauges
checkbox-empty
Select
Additel ADT103-M20 Adapter and Fitting, M20 X 1.5 Male to various, quick connect
checkbox-empty
Select
Additel ADT103-NPT Adapter and Fitting, 1/4" NPT Male to various, quick connect
checkbox-empty
Select
Additel ADT100 Hose Test Kit with 5 'Flexible Hose, 15K PSI, 1/4"NPTM-1/4"BSPF quick connect
checkbox-empty
Select
Additel ADT100-HTK-8K-NPTM4-BSPF4Q Hose Test Kit, 5' Flexible Hose, 8000PSI, 1/4"NPTM to 1/4"BSPF
checkbox-empty
Select
Additel ADT100-HTK-8K-NPTM4-NPTF4Q Hose Test Kit, 5' Flexible Hose, 8K PSI, 1/4NPTM-1/4NPTF, Quick Connect

All Products in Series