Yokogawa Y820-01-0-DCV4

Digital Panel Meter

Order #: Y820-01-0-DCV4

Mfg #: Y820-01-0-DCV4

Questions about availability or need help? Contact Us:

(800) 633-0561
$397.00

Yokogawa Y820-01-0-DCV4

Digital Panel Meter

Order #: Y820-01-0-DCV4

Mfg #: Y820-01-0-DCV4

$397.00
Availability:
Item discontinued

Only need this item for a short time? Learn about rentals

Questions about this product? Speak to an expert

Product Highlights

  • Meter Display Type 5 LED, 7-segment, 14.2mm (.56") high digits & 3 LED indicators Color Red or green
  • Range -99999 to +99999 and -99990 to +99990
  • A to D Conversion Technique Concurrent SlopeTM
  • Read Rate 60/s for 60 Hz NMR, 50/s for 50 Hz NMR
  • Output Update Rate 56/s at 60 Hz, 47/s at 50 Hz
  • Display Update Rate 3.5/s at 60 Hz, 3/s at 50 Hz
  • Noise Rejection CMV from DC to 60 Hz Withstand 250Vac
  • Dielectric strength 3.5 kV ac for 5 sec, 2.3 kV ac for 1 min
  • CMR from DC to 60 Hz 130 dB
  • NMR at 50/60 Hz 90 dB with minimum digital filtering
  • Power Requirements Input Voltage rating (standard) 85-264 Vac or 90-300 Vdc (DC range not UL approved)
  • Input Voltage rating (low voltage option) 12-32 Vac or 10-48 Vdc
  • Power Line Frequency DC and 47-63 Hz
  • Power Consumption, Max 5 Watts
  • Excitation Outputs Voltage & Current Levels (jumper selectable) 5 Vdc ±5%, 100 mA max
  • 10 Vdc ±5%, 120 mA max
  • 24 Vdc ± 5%, 40 mA max
  • Excitation Output Ripple 100 mVp max
  • Isolation from power and outputs 250 Vac
  • Insulation dielectric strength to power and outputs 3.5 kV ac for 5 sec, 2.3 kV ac for 1 min
  • Isolation to signal common 50 Vdc
  • Thermocouple Accuracy Span Tempco 0.003% of reading/°C 0.0015% of reading/°C for load cell meter Zero Tempco 0.2 ?V/°C
  • Reference Junction Accuracy 1°C, 10°C to 40°C
  • Dual & Quad Relay Options Power to Relay
  • Option Powered by meter Setpoint Setup Via front panel pushbuttons or RS232/485
  • Update Rate 56/s at 60 Hz, 47/s at 50 Hz
  • Response to input signal (min) Display update rate
  • Input Signal (selectable) Filtered or unfiltered input signal
  • Actuation Modes (selectable) Above or below setpoint, latching or non-latching, disabled
  • Output Time Delay (selectable) 1 to 128 readings
  • Front Panel Enable / Lockout Modes (selectable)
  • 1) Display and change setpoint
  • 2) Display but do not change setpoints
  • 3) Neither display nor change setpoints
  • Alarm Status Indication 2 or 4 red LED lamps
  • Status Indication Setup (selectable) Lit when output is ON or OFF, or disabled
  • Form C, SPDT Relay Output AC Rating 8A @ 240 Vac
  • DC Rating 8A @ 24 Vdc
  • Isolation rating between signal common and contacts 250 Vac
  • Insulation dielectric strength between signal common and contacts 3.5 kV ac for 5 sec, 2.3 kV ac for 1 min
  • Form A, SPST Solid State Relay Output AC Rating 130 mA @ 140 Vac
  • DC Rating 130 mA @ 180 Vdc
  • Isolation rating between signal common and contacts 250V ac
  • Insulation dielectric strength between signal common and contacts 3.5 kV ac for 5 sec, 2.3 kV ac for 1 min
  • Analog Output Option Power to Analog Output Option Powered by meter
  • Output Levels 0-20 mA, 4-20 mA, 0-10V, -10 to +10V
  • Voltage Compliance, 0-20 mA Output 12V (0-600 Ohm load)
  • Current Compliance, 0-10V, -10 to +10V Output 2 mA (5 kOhm or higher load)
  • Accuracy Meter input accuracy ±0.02% of full scale analog output
  • Resolution 16 bit (1 part in 65,536)
  • Response Time 50/60Hz update rate
  • Scaling of Reading for Zero Output -99,999 to +99,999
  • Scaling of Reading for Full Scale Output -99,999 to +99,999
  • Isolation rating between signal common and analog output 250V ac
  • Insulation dielectric strength between signal common and analog output 3.5 kV ac for 5 sec, 2.3 kV ac for 1 min
  • Environmental Operating Temperature 0°C to 55°C
  • Storage Temperature -40°C to 85°C
  • Relative Humidity 95% from 0°C to 40°C, non-condensing
  • Case NEMA-4X (IP65) from front when panel mounted (not verified for UL)
  • Shock 10 G at 1 kHz, applied in X, Y, Z axes
  • Vibration 15 Hz to 150 Hz, 1 mm to 2 mm amplitude, 20 G max.

Special Member Pricing
Buy with Calibration
Rental Instruments
Access to 100,000+ products
1,000's of instruments in stock
Product selection expertise
Application assistance
Purchase with a PO