Used PowerSight 15KVP High Voltage Probe, 15KV

Product Highlights

Summit Technology's model 15KVP voltage probes are capable of connecting directly to 3 phase voltages up to 15 kilovolts.

Normally, professionals who wish to measure 12,470 volt lines need to locate an installed PT (potential transformer) and then connect to the low voltage output secondary of the PT. The PT ratio is entered into the PowerSight so that primary values are displayed. However, sometimes a convenient PT is not available or the measurement must bypass the PT to verify whether the metering circuit is correct.

The 15KVP allows direct connection between the primary voltage and to your PowerSight analyzer.

The connection to the medium voltage is via a shepherd

Voltage Measurement Range: 600 to 15,000 Vrms

Voltage Linearity: +/-1% over measurement range

Frequency Response: Attenuation of 1db from 50 to 900 Hz (i.e. measurements attenuated 11% at 900 Hz, which is 15^th harmonic at 60Hz or 18^th harmonic at 50Hz).

Probe Dimensions: 16.5 inches long by 1.25 inch diameter. Hook at top has 2 inch outside diameter. Threaded coupling at bottom is 5/8 inch coarse thread.

Shepherd's Hook Dimensions: connection hook at the top has 1.4 inch inside diameter. It may be replaced with a custom connection item by unscrewing and replacing with a custom accessory with 1/4 - 20 threaded male coupling.

Scale: For direct reading of actual voltage, set meter for 60:1 input ratio.

• Connect directly to 3 phase 15KV
• Allows bypassing PTs (Potential Transformers)
• Shepherd's hook for easy connection to medium voltage (1.4 inch inside diameter)
• Shepherd's hooks may be unscrewed and replaced by alternative safe attachment method
• All connections are labeled and advisory labels are attached, for review each time the probes are used
• Measure harmonics up to 900 Hz
• For use exclusively with PowerSight line of Energy Analyzers