Order #: ZS1000-QUADPAK-USED
Mfg #: ZS1000-QUADPAK
Used Lecroy ZS1000-QUADPAK High Impedance Probes Set of 4 XZS1000, 1GHz
Order #: ZS1000-QUADPAK-USED
Mfg #: ZS1000-QUADPAK
Request a Used Instrument Quote
Have a Question? Speak to a Transcat Expert: 800.264.4059
Transcat Used Instrument Guarantee
Calibration Certificate Included 6 Month Warranty Unsurpassed Service & Support
![Loading...](https://www.transcat.com/static/version1721668873/frontend/Transcat/default/en_US/images/loader-1.gif)
Product Highlights
Key Features
- Easy to use, integrated with oscilloscope
- High Signal Fidelity to 1 GHz Bandwidth
- Low Circuit Loading - High Input impedance and low capacitance
- ± 8 V input dynamic range
- 1 MΩ input resistance
- 0.9 pF input capacitance
- ± 12 V offset range
- ProBus interface
- Wide variety of tips and leads
High Impedance Reduces Circuit Loading across Full Oscilloscope Bandwidth
Engineers must commonly probe high frequency signals with high signal fidelity. Typical passive probes with high input R and C provide good response at lower frequencies, but inappropriately load the circuit, and distort signals, at higher frequencies. The ZS Series features both high input R (1 MΩ) and low input C (0.9 pF) to reduce circuit Loading across the entire probe/oscilloscope bandwidth. The ZS1000 is ideal for 200-600 MHz oscilloscopes.
A Variety of Probe Tips for Varied Tasks
The small form factor and extensive range of standard and optional tip accessories for the ZS Series of probes ensures that this probe can meet any difficult probing challenge. Various flexible leads and clips, such as right-angle leads, Y-adapters, and pico hooks, are also available for probing test points that are spaced farther apart.
Innovative Grounding Provide the Highest Signal Fidelity
Keeping the ground loop short is critical to eliminating the effect of high inductance on the signal. The ZS Series of probes provides several grounding capabilities to offer the highest signal fidelity by eliminating the effect of that loop on the signal.
-
Used Keysight / Agilent E2669A InfiniiMax Differential/Single-ended Connectivity KitInfiniiMax Differential/Single- ended Connectivity Kit$1,000.00
-
Used Keysight / Agilent 81000BA Barefiber Adapter for 816xx and 815xx Series OpticalHeads, 125uBarefiber Adapter for 816xx and 815xx Series Opticl.Heads,125u$450.00
-
-
Used Keysight / Agilent N1294A Ultra Low Noise Filter (42V/105mA, 50 Ohm) for B2961/62AUltra Low Noise Filter (42V/ 105mA, 50 Ohm) for B2961/62ACall for price
-
Used Keysight / Agilent 86634A Phase Modulation Section RF Plug-In, 1 to 2600 MHzPhase Modulation Section RF Plug-In, 1 - 2600 MHz$49.00
-
Used Pearson Electronics 4100 Wideband Current Monitor, 1V/A,500A Current, 140Hz to 3MHzWideband Current Monitor 1V/A,500A Current,140Hz to 3MHz$499.00
-
Used Keysight / Agilent 11667A Power Splitter, DC to 18GHz, 1.33 Equivalent output SWRPower Splitter, DC to 18GHz 1.33 Equivalent output SWRCall for price
-
Used Keysight / Agilent N4691B Electronic Calibration Module (ECal), 300kHz to 26.5GHzElectronic Calibration Module (ECal)300kHz to 26.5GHz,3.5$5,999.00
-
-
-
Used Bruel & Kjaer 2238D Integrating Sound Level Meter Mediator, Class 1Integrating Sound Level Meter Mediator, Class 1Call for price
-
Used Keysight / Agilent U1818A Active Differential Probe, 100kHz to 7GHzActive Differential Probe 100 kHz to 7 GHzCall for price
-
Used Keysight / Agilent 85025E Coaxial Detector, 10MHz to 26.5GHzCoaxial Detector,10MHz to 26.5GHz$3,056.00
-
-
-
-
-
Used Keysight / Agilent 85024A High Frequency Probe, 300kHz to 3GHz, 0.7pF CapacitanceHigh Frequency Probe 300kHz to 3GHz, 0.7pF CapacitanceCall for price
-
Used Keysight / Agilent 34922T Terminal Block for 34922A MultiplexerTerminal Block for 34922A Multiplexer$149.00