Used Keysight E4362A Solar Array Simulator DC Module, 130V, 5A, 600W

Order # E4362A-USED | Mfg # E4362A
$0.00
Call for price
Also Available:

Request a Used Instrument Quote









Have a Question? Speak to a Transcat Expert: 800.264.4059

Used instruments from TranscatTranscat Used Instrument Guarantee, Calibration Certificate Included, 6 Month Warranty, Unsurpassed Service & Support

Tariff fees or manufacture imposed surcharges may be applicable.

This product is available for shipping to the United States, Canada, and Puerto Rico only.

Overview

Product Highlights

Output Ratings (Simulator and Table Modes)
  • Max. Power: 600 W
  • Voc Max.: 130 V
  • Isc Max.: 5 A
Output Ratings (Fixed mode)
  • Max Power: 600 W
  • V rated: 0-120 V
  • I rated: 0-5 A
Programming Accuracy at 22°C ±5°C
  • Voltage (Fixed Mode): 0.075% + 20 mV
  • Current (Fixed Mode): 0.2% + 10 mA
Ripple & Noise (20 Hz to 20 MHz)
  • Voltage rms, p-p (Simulator/Table Mode): 24 mV rms, 195 mV p-p
  • Voltage rms, p-p (Fixed Mode): 24 mV rms, 150 mV p-p
  • Current rms, p-p (Fixed Mode): 2.5 mA rms, 19 mA p-p

The Keysight E4362A is a 600W solar array simulator DC power module that simulates the output characteristics of a solar array. The E4362A is primarily a current source with very low output capacitance. It offers fast I-V curve changes allowing you to accurately simulate the output of different solar arrays under various environmental conditions (ex. temperature, age, eclipse, spin etc.). The E4360 gives you the flexibility to operate it in two ways:

  • Input the four key operational parameters (Voc, Isc, Vmp, Imp) needed for the SAS to internally create an I-V curve of a solar array
  • Download a user defined table for the I-V curve of the solar array

This module works with the Keysight E4360A Modular Solar Array Simulator (SAS) Mainframe which can hold up to two modules and saves rack space with its 2U high size. LAN, USB, and GPIB interfaces are standard.

Technical Resources