Tektronix TDS340A for Rent, 100 MHz Oscilloscope, 2 Channel, 500 MS/s Sampling Rate Digital Real-Time

Order # TDS340A-RENT2 | Mfg # TDS340A

Request a Rental Quote









Have a Question? Speak to a Transcat Rental Expert: 800.264.4059

Have a Question?

Speak to a Transcat Rental Expert at 800.264.4059

Tariff fees or manufacture imposed surcharges may be applicable.

Overview

Tektronix TDS340A Highlights

The Tektronix TDS340A oscilloscope is a graph-displaying device – it draws a graph of an electrical signal. In most applications, the graph shows how signals change over time: the vertical (Y) axis represents voltage and the horizontal (X) axis represents time. The intensity or brightness of the display is sometimes called the Z axis.

The Tektronix TDS340A oscilloscope's simple graph can tell you many things about a signal, such as: the time and voltage values of a signal, the frequency of an oscillating signal, the "moving parts" of a circuit represented by the signal, the frequency with which a particular portion of the signal is occurring relative to, other portions, whether or not a malfunctioning component is distorting the signal, how much of a signal is direct current (DC) or alternating current (AC) and how much of the signal is noise and whether the noise is changing with time.

  • Bandwidth: 100MHz
  • No. of channels: 2ch
  • Max. single ch. sampling rate: 500MSa/s
  • 100 MHz, 200 MHz, 400 MHz Bandwidths
  • 500 MS/s, 1 GS/s, 2 GS/s Sampling Rates
  • Two Input Channels
  • Built-In 3.5 in. Floppy Disk Drive
  • 2 mV/div to 10 V/div
  • Accumulate Display Modes
  • 2% Vertical Accuracy
  • 1 K Record Length
  • Roll Mode
  • 21 Automatic Measurements
  • FFT Analysis
  • 10 ns Peak Detect for High-speed Glitch
  • Capture
  • Option 14 for GPIB, RS-232-C
  • Programmability, Parallel Printer Interface, & VGA Monitor Output