Your Cart
You have no items in your shopping cart.
US 
CAN - en
RIGOL DG822
25MHz Function Generator, 2 Ch. 25MSa/sec, 16Bit Res, 2M Memor
Order #: DG822
Mfg #: DG822
$466.00
RIGOL DG822
25MHz Function Generator, 2 Ch. 25MSa/sec, 16Bit Res, 2M Memor
Order #: DG822
Mfg #: DG822
$466.00
Availability: Ships in 3-4 weeks
Product Highlights
- Unique SiFi II (Signal Fidelity II) technology: generate the arbitrary waveforms point by point; recover the signal without distortion; sample rate accurate and adjustable; jitter of all the output waveforms (including Sine, Pulse, etc.) as low as 200 ps
- 2 Mpts memory depth (standard); 8 Mpts memory depth (optional) per channel for arbitrary waveforms
- Optional dual-channel with the same performance, equivalent to two independent signal sources
- High frequency stability: ±1 ppm; low phase noise: -105 dBc/Hz
- Built-in high-order harmonic generator (at most 8-order harmonics)
- Built-in 7 digits/s, 240 MHz bandwidth full featured frequency counter
- Up to 160 built-in arbitrary waveforms, covering the common signals in engineering application, medical electronics, auto electronics, math processing, and other various fields
- Sample rate up to 125 MSa/s, vertical resolution 16 bits
- Arbitrary waveform sequence editing function available; arbitrary waveforms also can be generated through the PC software
- Various analog and digital modulation functions: AM, FM, PM, ASK, FSK, PSK, and PWM.
- Standard waveform combine function, capable of outputting specified waveforms combined with the basic waveforms
- Standard channel tracking function, when enabled, all the parameters of both channels are updated based on users' configurations
- USB Host&Device interface (standard); USB-GPIB function supported
- 4.3'' TFT color touch screen
- RS232, PRBS, and Dual-tone outputs supported
Each Unit Includes
- 1 Power Cord conforming to the standard of the destination country
- 1 BNC Cable (only provided by DG832/DG831/DG822/DG821) CB-BNC-BNC-MM-100
- 1 Quick Guide
- 1 Product Warranty Card
All products in this series
-
Blade Runner: 2049 - Deckard's Blaster Technical MatBlade Runner: 2049 - Deckard's Blaster Technical Mat
Okay, there's way too many people displaying their gear on oven mitts, doilies, tablecloths, bare surfaces, etc. Team Paragon to the rescue! Protect your stuff and the surfaces you're otherwise working on!
While these are primarily intended as a great display option, they can actually be used as hobby or project mats!
Each officially licensed mat measures 12" x 17" and is 3mm thick. Manufactured in the United States of natural vulcanized rubber w/ non-slip base. Dye sublimation is resistant to oils, solvents and chemicals.
Note: This is a 'fantasy' technical mat. It is not intended to serve as a schematic by which one may tear down their replica. It's made for display or to otherwise serve as a protective service on which to work, build or just be creative.
Blaster Replica not included
Another awesome Blade Runner collectible, proudly brought to you by Popcultcha! Check out our full Blade Runner collection here.
As low as $59.99 -
Blade Runner: 2049 - Deckard's Blaster Water Gun 1:1 Scale Life-Size Action ModelBlade Runner: 2049 - Deckard's Blaster Water Gun 1:1 Scale Life-Size Action Model
The prop makers at Paragon FX Group are proud to announce their 1:1 Deckard's Blaster Water Gun Life-Size Action Model. Cast directly from our Elite replica, this full-size water blaster includes imitation red and green LEDs (5 red rhinestones & 2 green cast tips) for optional customisation. Each Blaster ships on art card within blister packaging.
This limited edition piece will see a one-time production run from Paragon of 3000 units.
*Stand not included*
Another awesome Blade Runner collectible, proudly brought to you by Popcultcha! Check out our full Blade Runner collection here.
As low as $119.99 -
Blade Runner 2049 - K's Spinner 3.5" Scaled Die-Cast Vehicle ReplicaBlade Runner 2049 - K's Spinner 3.5" Scaled Die-Cast Vehicle Replica
Popcultcha Pre-Order Price Promise: Don't miss your chance to secure this item for your collection at our limited time only special pre-order price!
Threezero proudly introduces K's Spinner, the follow-up to the first release in the series, the Police Spinner of Rick Deckard, from Blade Runner 2049!
K, an officer with the Los Angeles Police Department, unearths a secret that could create chaos. He goes in search of a former blade runner who has been missing for over three decades.
K's Spinner measures approximately 3.7 inches (9.4 cm) in length and features a die-cast zinc alloy chassis that enhances structural integrity and adds heft to the vehicle. It boasts a matte black finish, scissor doors, and a three-wheel configuration. K's Spinner is equipped with three different types of engines: a combustion engine, a jet engine, and an anti-gravity engine. The retractable rear wheel design faithfully reproduces how the Spinner's wheels are stowed during take-off, as seen in the movie.
PRODUCT FEATURES:
- 3.70 inches long (9.40cm)
- Made of ABS, PVC, POM, and Zinc Alloy
- Based on the Blade Runner 2049 movie
- Highly detailed
- Features scissor-style doors and retractable rear wheel
- Officially licensed
Proudly brought to you by Popcultcha, Australia's largest and most comprehensive online store for action figures. CLICK HERE to see our full range of action figures.
As low as $44.99 -
Blade Runner: 2049 - Deckard’s Police Spinner 3.7" Vehicle ReplicaBlade Runner: 2049 - Deckard’s Police Spinner 3.7" Vehicle Replica
Popcultcha Pre-Order Price Promise: Don't miss your chance to secure this item for your collection at our limited time only special pre-order price!
The highly-anticipated, long-awaited Blade Runner sequel; Blade Runner: 2049 won over fans of the classic sci fi epic, introducing audiences a new cast of characters in the Blade Runner universe.
Threezero is venturing into the production of small-scale vehicles, debuting with the absolutely iconic Rick Deckard’s Police Spinner from the classic noir sci-fi movie sequel, Blade Runner 2049!
Deckard’s Police Spinner is 3.7 inches long, with a die-cast zinc alloy chassis. The solid construction not only adds a substantial feel to the compact body, but also enhances the overall strength of the product. The vehicle’s exterior features the police markings as seen in the film, with threezero’s signature weathering paint effect to authentically recreate the look of a vehicle that has endured the ravages of rain, pollution, and time while Deckard is in hiding in the harsh future environment.
The vehicle’s two scissor-style doors can open vertically, revealing the intricate details of the cockpit interior. The two front wheels are retractable, and the front wheel covers on the sides can rotate 90 degrees to recreate the Spinner’s iconic flight-mode capabilities. All four wheels are fully functional and can turn.
An absolute must for any Blade Runner fan!
Another awesome Blade Runner collectible, proudly brought to you by Popcultcha! Check out our full Blade Runner collection here.
As low as $44.99
