Bruel & Kjaer 4290 FOR RENT

Cal Exciter/Electrodynamic Vibration Exciter 200Hz - 50kHz

Order #: 4290-RENT2

Mfg #: 4290

Questions about availability or need help? Contact Us:

(800) 828-1470
Call for price
Call for price

Bruel & Kjaer 4290 FOR RENT

Cal Exciter/Electrodynamic Vibration Exciter 200Hz - 50kHz

Order #: 4290-RENT2

Mfg #: 4290

Call for price
Call for price


Contact Transcat's Rental Team

Availability:
In stock
Available Promotions

Only need this item for a short time? Learn about rentals

This item is available USED at
$2,995.00
Shop now
Questions about this product? Speak to an expert

Bruel & Kjaer 4290 Highlights

Calibration Exciter/Electrodynamic Vibration Exciter 200Hz to 50kHz. Designed to vibrate accelerometers or small components with reliable acceleration control up to 30kHz. The Exciter consists of two separate parts, a cylindrical permanent magnet and a small compact moving element with built-in control accelerometer. When the moving element is placed onto the core of the permanent magnet, the drive coil is situated in the radial magnetic field produced by the magnet. Suitable suspension is obtained by simply inserting a disc of foam nylon between the moving element and the magnet core. (This type of floating suspension has no transverse resonance in the frequency range of the calibration exciter.)

The suspension resonance occurs at 30 to 100 Hz. Small dimensions, extreme compactness and rigid construction, give the moving element an outstandingly high first resonant frequency: above 50 kHz. The built-in control accelerometer, which has a mounted resonant frequency around 60 to 70 kHz, follows exactly the movement of the table, and the output signal is used to control and monitor the acceleration at the table surface.

  • The exciter will be driven by a sine/noise generator through a power amplifier. The maximum force output which is around 3 N (0.675 lbf) peak is obtained with a power of 2.5 W
  • The acceleration level obtained with a typical 30 g accelerometer is of the order 1 ms–2 (0.1 g) which is sufficient for calibration of piezoelectric accelerometers
  • The calibration exciter can be used in environmental test chambers in a range from 0 to 80°C (32 to 176°F)