Amplifier Research 175S1G4A for Rent, Microwave Amplifier, 0.7 - 4.2GHz, 175W
Order #175S1G4A-RENT3|Mfg #175S1G4A
For Rent
Request a Rental Quote
Have a Question? Speak to a Transcat Rental Expert: 800.264.4059
Have a Question?
Speak to a Transcat Rental Expert at 800.264.4059
Tariff fees or manufacture imposed surcharges may be applicable.
Overview
Product Highlights
The Amplifier Research 175S1G4 is a portable, self-contained, air-cooled, broadband, and completely solid-state ampifier designed for applications that require instantaneous bandwidth, high gain, and linearity. Its push-pull circuitry is utilized in all power stages lowering distortion and improving stability.
Features:
Provides a minimum of 175 watts of RF power when used with a sweep generator
Digital Control Panel (DCP):
Provides both local and remote control of the amplifier
Uses a digital display:
Provides operational presentation of Forward Power and Reflected Power
Provides control status
Provides reports of internal amplifier status
Uses menu assigned softkeys
Uses a single rotary knob
Uses four dedicated switches: POWER, STANDBY, OPERATE, and FAULT/RESET
Offers extensive control and status reporting capability
Gain control and RF output level protection
All control functions and status indications are available remotely in GPIB/IEEE-488 format, RS-232 hardwire and fiber optic, USB, and Ethernet
Bus interface connector on back panel
Keylock on front panel assures positive control of local or remote operation
Low level of spurious signals and linearity make it ideal for these various uses:
A driver amplifier in testing wireless and communication components and subsystems
A test instrument covering multiple frequency bands
For communication technologies including CDMA, W-CDMA, TDMA, GSM, etc.
For EMC Test applications where undistorted modulation envelopes are needed
Specifications:
Rated power output: 175 watts minimum
Input for rated output: 1.0 milliwatt maximum
Power output @ 3dB compression:
Nominal: 190 watts
Minimum: 160 watts
Power output @ 1dB compression:
Nominal: 165 watts
Minimum: 135 watts
Flatness:
Typical: +/-1.5 dB
Maximum: +/-2.0 dB
Frequency response: 0.8 - 4.2 GHz instantaneously
Gain (at maximum setting): 52.5 dB minimum
Gain adjustment (continuous range): 15 dB minimum (4096 steps remote)
Input impedance: 50 ohms, VSWR 2.0:1 maximum
RF power display: 0-200 watts
Output impedance: 50 ohms, nominal
Mismatch tolerance:
100% of rated power without foldback
Will operate without damage or oscillation with any magnitude and phase of source and load impedance
Modulation capability: Will faithfully reproduce AM, FM, or pulse modulation appearing on the input signal
Third order intercept point: 61 dBm typical
Harmonic distortion: Minus 20 dBc maximum at 160 watts
