High Voltage Inc TD-34E FOR RENT

Power Factor / Tan Delta Bridge for VLF-34E

Order #: TD-34E-RENT1

Mfg #: TD-34E

Questions about availability or need help? Contact Us:

(800) 633-0561
Call for price
Call for price

High Voltage Inc TD-34E FOR RENT

Power Factor / Tan Delta Bridge for VLF-34E

Order #: TD-34E-RENT1

Mfg #: TD-34E

Call for price
Call for price

Rent from the Instrument experts at TranscatRent from the Instrument experts at Transcat
Availability: Call for Availability
Available Promotions
This product is available for shipping to the United States, Canada, and Puerto Rico only.
This item is available USED at
Call for price
Shop now
Questions about this product? Speak to an expert

Product Highlights

The High Voltage, Inc. TD-34E Tan Delta bridge is designed to work with and communicate wirelessly via the XBee protocol to the VLF-34E to form a complete cable diagnostic system. Together they offer high end features such as wireless communication, data acquisition, and report generation using the supplied E-Link PC software. This system is designed to perform Tan Delta testing, also known as Tan ?, Dissipation Factor or Loss Angle on 5 to 25kV primary cables to the worlds standards; IEEE 400, IEEE 400.2, IEEE 433, DIN VDE 0276, CENELEC HD620 S1, NEETRAC CDFI, & others. Tan Delta testing is a non-destructive diagnostic test performed to measure the degree of deterioration of shielded MV/HV cable insulation. The results reveal how contaminated, damaged, or water tree strewn the insulation has become. Tan Delta testing is performed with the cable off-line where an AC power source, in this case a very low frequency (0.1Hz) hipot, provides the test voltage to the cable while the Tan Delta device records the results. The test voltage is increased in steps while readings are monitored to avoid possible cable failure should the TD numbers indicate severe degradation.

Special Member Pricing
Buy with Calibration
Rental Instruments
Access to 100,000+ products
1,000's of instruments in stock
Product selection expertise
Application assistance
Purchase with a PO

Voltage Measurement Range: 1 - 34 kV peak/1 - 25 kV rms
Accuracy & Resolution: 1% & 0.1 kV peak
Current Measurement Range: 0 - 15 mA rms
Accuracy & Resolution: 1% & 1 µA
Tan ? Measurements Load Range Freq: 0.1 Hz - 0.01 Hz, 5 nF - 10 µF Accuracy & Resolution 1.0 x 10-4 & 1 x 10-5
Communications Range: ~ 30 m XBee 802.15.4 (not Bluetooth)
Power Input - Battery NiMH 4 "C" cells with charger - 2 needed
Alkaline Standard batteries usable
Dimensions TD Transducer 8" x 4.5" x 4" (203 x 114 x 102 mm)
TD Carrying Case 12" x 11" x 7.5" (305 x 280 x 191 mm)
Accessories Bag w/cables, tripod, . . 15" x 5" x 12" (381 x 127 x 305 mm)
Weight TD Transducer - w/case 5 lbs/2.3 kg 8 lbs/3.6 kg
Access. bag 10 lbs/4.5 kg
Input Cable Connection MC Connector - Male120 square mm
Output Connection 1/4 - 20 female thread w/accessories
Ground Connection 1/4 - 20 stud w/wingnut
Environmental Requirements Operating temp: - 10°C to + 55°C
Storage temp: - 25°C to + 65°C
Humidity: 80% up to 31°C (88°F)