Ralston Instruments XTXT-HOS-20FT Quick-test XT 10000PSI, Hose Stainless Steel Hose Ends, 20ft

Product Highlights

• Low volume reduces the pumping effort or compressed gas usage in pressure calibration
• No thread sealant required – connect adapters to without wrenches, thread sealant or thread tape
• Bubble tight connections to 10000 psi (689 bar) with no moving parts reduces maintenance to almost zero
• Hose is hard to break and very flexible
• Adapt from hose to virtually any device under test with only one connection
• A corrosion resistant strain-relief on each hose end reduces wear and dramatically increases hose life
• Note that these hoses are NOT compatible with QTHA adapters. Please use XTHA adapters
• Made in USA
• Length 20 ft
• Pressure Range 0 to 10000 psi (0 to 689 bar)
• Burst Pressure 40000 psi (2,756 bar)
• End 1 Female Quick-test XT, stainless steel
• End 2 Female Quick-test XT, stainless steel
• Temperature range 0 to 140 °F (-18 to 60 °C)
• Outer Diameter 0.24 in (6.1 mm)
• Inner Diameter 0.08 in (2.0 mm)
• Minimum Bend Radius 1 in (25.4 mm)
• Color Blue
• Construction Polyamide core tube, High tensile synthetic fiber and polyamide outer cover
• End materials Stainless Steel
• Fluid Media Water, Petroleum Based Oil, Air, Inert Gas