Ralston QTQT-HOS-3FT Quick-test 6900PSI Hose, Brass Ends, 3'

Hoses that provide a very quick, low volume, high pressure way of connecting to any pressure instrumentation, hand pump, calibration source or device under test
Low volume reduces the pumping effort or compressed gas usage in pressure calibration
No thread sealant required - connect adapters to without wrenches, thread sealant or thread tape
Bubble tight connections to 6900 psi (brass) or 11,040 psi (stainless steel) with no moving parts
No moving parts reduces maintenance to almost zero
Hose is hard to break and very flexible
Adapt from hose to virtually any device under test with only one connection
Silver color dramatically reduces the effect that changing temperature has on pressure stability
A strain-relief on each hose end reduces wear and dramatically increases hose life
Weight: 2.68 oz / 76 grams
Width: 0.69 in / 18 mm
Height: 0.69 in / 18 mm
Burst Pressure: 27000 PSI / 1860 bar / 185 MPa
Color: Silver
Country of origin: USA
Fluid Media: Air,Inert Gas,Natural Gas,Petroleum Based Oil,Water
Hose Length: 3ft / 0.91 m
Inner Diameter: 0.08 In / 3.00 mm
Length: 3 ft / 92 cm
Materials: Brass
Max Operating Temperature: 140 °F / 60 °C
Max Pressure: 6900 PSI / 475 bar / 48 MPa
Max Vacuum: -30 InHg / -101.6 kPa
Media Compatibility: Air, Inert Gas, Natural Gas, Petroleum Based Oil, Water
Min Operating Temperature: -40 °F / -40 °C
Minimum Bend Radius: 1 In / 26 mm
Outer Diameter: 0.2 In / 6.00 mm
Type: QT
Hose End 1: Female Quick-test, brass
Hose End 2: Female Quick-test, brass

Ralston Instruments QTQT-HOS-3FT Quick-test 6900PSI Hose, Brass Ends, 3'