MadgeTech MOTOR101A Power Cycle Data Logging System

Overview

Product Highlights

Motor101A-C, machinery on/off data logging system. Includes data logger, current switch and IFC200 interface cable.

The Motor101A is a data logging system to monitor the on/off status of motors. Includes declaration of conformance.

State101A State Data Logger
Current Switch
IFC200 Interface Cable

The Motor101A was designed to measure and record the on/off status changes for motors or other equipment drawing up to 200 Amps.

Just clamp the Motor101A to a wire and when the current passing through exceeds 150 mA the output changes, providing a voltage for the Motor101A to measure. This device can hold up to 825,753 readings, but memory will only be used if the status has changed.

The Motor101A is compatible with the latest MadgeTech 4 Software making starting, stopping, and downloading simple and easy. Graphical, tabular, and summary data is provided for analysis and can be viewed as customizable engineering units.

Technical Resources

Madgetech MOTOR101A Datasheet
Madgetech MOTOR101A Product User Guide

Specifications

Memory	838,041 readings
Reading Rate	4 Hz to 1 every 24 hours
Baud Rate	115,200
LED Indicators	Red & Green
Push-Button Start	Yes
Battery Life	10 years typical
Material	ABS Plastic
Dimensions	Data Logger: 1.4 in x 2.2 in x 0.6 in (36 mm x 56 mm x 16 mm); Current Switch: 2.1 in x 3.5 in x 1.0 in (54 mm x 89 mm x 16 mm)
Operating Environment	-15 °C to +40 °C (+5 °F to +104 °F), 10 %RH to 90 %RH non-condensing
Required Interface Package	IFC200
Approvals	CE

State Resolution	1 second (reading rate dependent)
Amperage Range	0.15 to 200 Amps
Trip Point	0.15 A (150 mA) fixed (200 mA AC for 50 Hz operation)
Status Output	N.O.1.0 A at 30 VAC/DC
Housing	Split Core