Dionamix L-3560 Refractive Idex Detector

	Specification
Construction	Deflection type
Refractive Index Range	1.00 ~ 1.75
Range	1/4 ~ 512 µRIU
Linearity	600 µRIU
Noise	≤2.5 nRIU( Response : 3 seconds )
Response Time	0.1, 0.25, 0.5, 1.0, 1.5, 2, 3, 6 sec.
Polarity	Positive/Negative
Auto Zero	Optical & Electrical Auto-Zero
Auto Zero Range	All Refractive Index Range
Auto Zero Resolution	≤1 (@8mV/µRIU) / 4 (@2mV/µRIU) nRIU
Offset Range	0 to 500mV (same with Integrator output sensitivity)
Offset Resolution	10mV (same with Integrator output sensitivity)
Integrator Output	0 to 1V/FS (Sensitivity: 2mV/mRIU, 8mV/mRIU)
Recorder Output	0 to 10mV/FS
Event Marker Marker out:	≥5% of FS
Temperature Control	OFF, 30 to 55°C (1°C increment): 80°C Thermal Protector
Operator Support	Span Check/Validation Display
External Communication	RS232C
Cell Volume	8µL
Maximum Flow Rate	10 ml/min (mobile phase: pure water)
Pressure Rating	50 kPa (0.5 kgf/cm2)
Internal Volume	Inlet Port / Flow Cell: approx. 60µL	Flow Cell / Outlet Port: approx. 480µL	Total: approx. 540µL
	Wetted Material	SST316, Teflon, Quarts Glass
	Power Requirement	100 ~ 240VAC +/- 10%: 50-60Hz
Power Consumption	120VA maximum
Dimensions	H 150 x W 260 x D 450 (mm)
Weight	12 kgs (26 lbs)
EMC Standards	EN61326-1,EN61326-2-1
Safety Standards	EN61010-1

Dionamix L-3560