AEMC MR6292

AC/DC Current Probe for Model 6292

Order #: 2129.86

Mfg #: 2129.86

Questions about availability or need help? Contact Us:

(800) 633-0561
$295.00

AEMC MR6292

AC/DC Current Probe for Model 6292

Order #: 2129.86

Mfg #: 2129.86

$295.00
Availability: Item ships in about Ships in 1-2 weeks
Available Promotions

Only need this item for a short time? Learn about rentals

Questions about this product? Speak to an expert

Product Highlights

The AC/DC Current Probe Model MR6292 is an accessory for the AEMC® Micro-Ohmmeter Model 6292. The Model MR6292 probe is required for using the Model 6292 to take measurements in BSG (both sides grounded) mode. The probe is designed to meet the latest safety and performance standards. The probe’s hook-shaped jaws enable you to “pry” into or “hook” onto cables (it will accept 2 x 500 MCM) or small bus bars.

The Model MR6292 uses Hall effect technology. All electronics are self-contained in the handle. The output of the probe is 10mV/A. No battery is required; the probe operates via voltage provided by the Model 6292. The probe has a proportional mV output for direct reading on the Model 6292.

Special Member Pricing
Buy with Calibration
Rental Instruments
Access to 100,000+ products
1,000's of instruments in stock
Product selection expertise
Application assistance
Purchase with a PO

Measurement Range 1 to 50ADC
Accuracy 1 to 50ADC: 1.5% reading ± 0.2A
Output Signal 10mV/ADC
Load Impedance >100kΩ/100pF
Insertion Impedance 0.39mΩ @ 50Hz, 58mΩ @1000Hz
Working Voltage 600Vrms
Influence of Adjacent Conductor <10mA/A at 50Hz at 23mm from the probe
Influence of Conductor in Jaw Opening 0.5% reading
Power Source Powered by Micro-Ohmmeter Model 6292
Jaw Opening 1.2" (31mm)
Maximum Cable Diameter One 1.18" (30mm) or two 0.95" (24mm) or two bus bars 1.2 x 0.4" (31.5 x 10mm)
Output 4-conductor shielded cable with 5-pin XLR connector
Dimensions 8.8 x 3.82 x 1.73" (224 x 97 x 44mm)
Weight 15 oz (440g)
Saftey EN 61010-2-32, 600V CAT III, Pollution: 2