PIE 830 for Rent, Dual Channel Multifunction Diagnostic Calibrator
Dual Channel Multifunction Diagnostic Calibrator
Order #: PIE-830-RENT1
Mfg #: PIE-830-RENT1
Call for price
Call for price
PIE 830 for Rent, Dual Channel Multifunction Diagnostic Calibrator
Dual Channel Multifunction Diagnostic Calibrator
Order #: PIE-830-RENT1
Mfg #: PIE-830-RENT1
Call for price
Request a Rental Quote
Have a Question? Speak to a Transcat Rental Expert: 800.264.4059
Call for price
Availability:
In stock
Product Highlights
First Multifunction calibrator with 5 troubleshooting tools including a universal transmitter:
- Detect hidden loop problems with Patented Current leak detection technology
Quickly diagnose troublesome ground faults & current leakage with patented Loop Diagnostic technology. These problems are undetectable with other instruments! - Check all loop parameters at once with the LoopScope
Simultaneously displays current, voltage and resistance to let you know the condition of a live loop. Finds problems with power supplies & loops with too many loads. Patented by PIE! - Automatically detect 2, 3 or 4 wire RTDs
Trouble shoot sensor connections and find broken wires with patented technology. LCD indicates which of the four wires are connected to an RTD sensor. - Swap out faulty transmitters to diagnose control issues
Easily setup the 830 as a universal isolated transmitter for temperature, frequency, millivolt or pressure. If the loop is back under control you know the transmitter was faulty. Turn on the LoopScope to simultaneously see the loop current, power supply voltage and loop loads for troubleshooting. - Troubleshoot wiring problems without a multimeter
Built in continuity checker with beeper quickly finds broken wires or shorts in instrumentation wiring.
- Lighten up your toolbox
Pocket sized calibrator replaces toolbox of single function devices; dual channels allows for use of only 1 calibrator instead of 2! - Technician friendly operation
Intuitive EZ-DIAL double click menu makes it easier to setup than other multifunction calibrators. Uses the same menus as the single function PIE Evolution calibrators. Icons on the display indicate where to plug in the test leads. - Use it as a milliamp and voltage calibrator
Source 0.00 to 24.00 mA, 0.00 to 10.25 VDC, -20.000 to 99.999 mV and -500.00 to 999.99 mV
Read to 24.00 mA, 0.0 to 60.0 VDC, +/- 99.999 mV and +/- 999.99 mV
Simulate 2 Wire transmitters
Power up transmitters and loops with built in 24 V power supply
Simplify HART hook ups with built in 250 ohm resistor - Calibrate directly in temperature (°C & °F)
The PIE 830 works with the instruments you use.
Thermocouple types J, K, T, E, R, S, B, N, G, C, D, L (J DIN), U (T DIN) and P(Platinel II)
RTD types Pt 100 Ohm (3850, 3902, 3916, 3926) & 1000 Ohm (3850)
Copper 10 & 50 Ohm, Nickel 110 and 120 Ohm - Checkout flow and vibration systems
Source & read frequency to 2000 CPM (Counts-Per-Minute), 999.99
Hz, 9999.9 Hz, & to 20.000 kHz - Simulate pH probes into transmitters & analyzers
Source from 0.000 to 14.000 pH @ 25°C (77°F) corresponding to +414.12 to -414.12 mV - Measure pressure with optional pressure modules
32 modules for gauge, differential, compound and absolute pressure - Quickly set any three outputs plus automatic stepping & ramping
Easily set any value quickly with the adjustable "DIAL"; store any three output settings for instant recall with the EZ-CHECK™ switch.
Choose between 2, 3, 5 & 11 steps to automatically increment the output in 100%, 50%, 25% or 10% of span.
Select RAMP to smoothly increase and decrease the output between Zero and Span.
Set step/ramp time to match your system from 5, 6, 7, 8, 10, 15, 20, 25, 30 and 60 seconds - Measure temperature sensors, frequency pickups, loop currents, voltage levels & pressures
Check the values of your process sensors. Instantly recall MAX and MIN values to see process variability - Includes Rubber Boot, Deluxe Hands Free Carrying Case & mV/RTD Test Leads (020-0820)
Related Products
-
Yokogawa WT1806 for Rent, High Performance Power Analyzer with 6 input elementsHigh Performance Power Analyzer with 6 input elementsCall for price
-
Keysight 85033E for Rent, Standard Mechanical Calibration Kit, DC to 9GHz, 3.5mm
Standard Mechanical Calibration Kit, DC to 9GHz, 3.5mm
Call for price -
Druck DPI620-KIT for Rent, Genii Modular Calibrator & HART Communicator kitGenii Modular Calibrator & HART Communicator kitCall for price
-
Fluke 5320A for Rent, Multifunction Electrical Tester CalibratorMultifunction Electrical Tester CalibratorCall for price
-
Ametek - Jofra ASC-400-BARO for Rent, Advanced Signal Calibrator with Baro ModuleAdvanced Signal Calibrator w/Baro ModuleCall for price
-
Druck DPI620CE for Rent, Multifunction Calibrator with Windows CE + HARTMultifunction Calibrator with Windows CE + HARTCall for price
-
-
Valhalla Scientific 2500EN for Rent, Programmable AC/DC CalibratorProgrammable AC/DC CalibratorCall for price
-
-
Fluke 754 for Rent, Multifunction Documenting CalibratorMultifunction Documenting CalibratorCall for price
-
-
Fluke Calibration 5725A for Rent, Calibrator Amplifier for 5700ACalibrator Amplifier for 5700ACall for price
-
Druck DPI620G for Rent, Genii Multifunction CalibratorGenii Multifunction CalibratorCall for price
-
Fluke Calibration 5100B for Rent, AC/DC Calibrator, Voltage to 1100VAC/DC Calibrator, AC or DC Voltage to 1100VCall for price
-
Fluke Calibration 5522A/1GHZ for Rent, Multi-Product Calibration Standard with 1.1GHz ScopeMulti-Product Calibration Std.w/1.1GHz ScopeCall for price
-
Fluke 5500A/COIL for Rent, Current Coil 50 Turns (NCR)5500A/Current Coil 50 Turns (NCR)Call for price
-
Druck DPI620GFF for Rent, Genii Multifunction Calibrator with FieldbusGenii Multifunction Calibrator w/FieldbusCall for price
How to Rent from Transcat
1. Select Your Rental Product
- Need help selecting a unit? Try using our Product Finder or search our available units
- Can’t find what you are looking for? Is the rental unit you need, not available? Give us a call at 800-828-1470 or our chat feature to speak with one of our dedicated Rental Experts
2. Contact Our Team of Rental Experts
- Contact us here or click below to submit your request for a rental quote and a member of our Rental Team will review the request and will reach out to you very soon
3. Select Your Rental Period & Complete Your Order
- Our weekly period lasts 7 calendar days, while our monthly rental period lasts 28 calendar days
- Provide your form of payment, sign the rental agreement and any other required documents, and we will ship you the unit