Onset HOBO S-WSET-B Wind Speed & Direction Sensor Set, 2.5-170mph

Onset HOBO Data Loggers S-WSET-B

Order # S-WSET-B

Mfg # S-WSET-B

call-regular 800-828-1470
Save 20%
$699.00
$560.00
Loading...
Loading...
  • Overview
  • Specifications

Onset HOBO Data Loggers S-WSET-B

Order # S-WSET-B | Mfg # S-WSET-B
Save 20%
$699.00
$560.00
arrow_drop_down

Tariff fees or manufacture imposed surcharges may be applicable.

This product is available for shipping to the United States and Puerto Rico only.

Overview

Product Highlights

This combination provides average wind speed, highest 3-second wind gust, and average wind direction for the measurement interval. These durable sensors will provide many years of accurate and reliable performance.

  • Wind Sensor Set includes Onset's research-grade plug-and-play Wind Speed Smart Sensor and the Wind Direction Smart Sensor
  • Provides average wind speed, highest 3-second wind gust, and average wind direction for the measurement interval
  • Durable sensors
  • NOTE: Mount these on the M-CAA Full Cross Arm for proper sensor spacing for accurate wind measurement in all wind directions.

Specifications

Specifications Wind Speed/Gust (S-WSB-M003) Wind Direction (S-WDA-M003)
Measurement Range 0 to 76 m/s (0 to 170 mph) 0 to 355 degrees, 5 degree dead band
Maximum Wind Speed Survival 76 m/sec (170 mph)

67 m/sec (150 mph)
Accuracy ± 1.1 m/s (2.4 mph) or
± 4% of reading whichever is greater		 ± 5 degrees
Resolution 0.5 m/s (1.1 mph) 1.4 degrees
Starting Threshold 1.0 m/s (2.2 mph) 1.0 m/s (2.2 mph)
Measurement Definition Cup revolutions are accumulated every three seconds for the duration of the logging interval. Wind speed is the average speed for the entire logging interval. Gust speed is the highest three-second wind recorded during the logging interval. Unit vector components of wind direction are accumulated every three seconds for duration of logging interval. Average direction is calculated from the average of these.
Operating Temperature Range -40°C to +75°C (-40°F to +167°F) -40°C to +70°C (-40°F to +158°F)
Environmental Rating Weatherproof Weatherproof
Service Life Greater than 5 years typical 4 to 6 years typical depending upon environmental conditions
Housing Three cup polycarbonate anemometer: Modified Teflon® bearings and hardened beryllium shaft with ice shedding design Injection-molded housing and vane, static dissipating base, lead-free silicon bronze nose, and aluminum mounting rod.
Bearing Type Modified Teflon® bearings two shielded stainless steel ball bearings
Turning Radius 9.5 cm (3.75 in.) Approximately 13.5 cm (5.25 in.)
Dimensions 41 x 16 cm (16 x 6.5 in.) including 1.27 cm (0.5 in) diameter mounting rod; 5.5 cm (2.1 in.) drip overhang 46 x 20 cm (18 x 8.5 in) including 1.27 cm (0.5 in) diameter mounting rod, 2.5 mm (0.1 in) drip overhang
Weight Approximately 700 g (1.5 lbs) Approximately 370 g (13 oz)
Number of Data Channels 2 1
Measurement Averaging Option No Automatic averaging (see Measurement Definition)
Cable Length Available 3.5 m (11.5 ft) 3.5 m (11.5 ft)
Length of Smart Sensor Network Cable 0.5 m (1.6 ft) 0.5 m (1.6 ft)
CE The CE Marking identifies this product as complying with all relevant directives in the European Union (EU) The CE Marking identifies this product as complying with all relevant directives in the European Union (EU)
Part Number S-WSB-M003 S-WDA-M003