NOSHOK 3110-MMC

Product Highlights

• Designed for use with differential pressure transmitters incorporating two isolation valves and an equalizing valve in differential pressure measurement
• Available in block, single flange, or double flange connection for remote or direct installation
• All manifold bodies are machined from cold drawn extrusion allowing NOSHOK to hold tighter tolerances
• 100% helium leak tested to 1 x 10-4 ml/s for guaranteed performance and reliability
• 3010 Series hard seat valves have 10,000 psi pressure rating (@ 200°F maximum)
• 3110 Series soft seat valves have 6,000 psi pressure rating (@ 200°F maximum)
• 3110 Series soft seat valves also feature a replaceable Delrin® seat, and straight through porting for bi-directional, high capacity flow and easy roddable cleaning
• Blow-out proof stem provides a secondary stem seal in the full open position
• Viton® o-ring seal and Teflon® back-up ring below the stem threads to protect from corrosion and galling
• All stem threads are 316 stainless steel
• All stem threads are rolled for strength and ease of operation
• One-piece bonnet with a metal-to-metal seal to the valve body below the bonnet threads
• Bonnet lock pin to prevent accidental loosening
• Vinyl bonnet and stem dust cap
• 0.187 inch orifice size