Mitutoyo 543-702B Digimatic ID-C Indicator Digimatic ID-C Indicator ID-C0512ENXB

Order # 543-702B | Mfg # 543-702B
Save 4%
$501.00
$480.96
arrow_drop_down

Tariff fees or manufacture imposed surcharges may be applicable.

This product is available for shipping to the United States, Canada, and Puerto Rico only.

Overview

Product Highlights

  • Bidirectional communication e.g. to perform parameter setting from a PC (Digimatic S 1 interface) is possible.
  • The ABSOLUTE sensor means you don‘t have to carry out origin setting every time you power it on, saving you time and hassle.
  • Excellent visibility with a large digital/analog display.
  • Model with 0,5 um digital step is available.
  • Measurements such as simple calculation and peak detection are possible.
  • Equipped with a calibration schedule warning function.
  • GO/+/-NG judgement is performed by setting the upper and lower tolerances.
  • Display 330degree rotatable.
  • A function lock protects the display against unauthorised use.
  • Digital/Analog: Digital
  • Inch-Metric: Inch/Metric
  • Model: ID-C0512ENXB
  • Range: 0.5"/12.7 mm
  • Digital step: 0.00002"/0.00005"/0.0001"/0.0005", 0.0005 mm/0.001 mm/0.01 mm
  • Max. Permissible Error E MPE (Total Range): +/-0.00012"/0.003 mm
  • H MPE (Hysteresis): 0.00008"/0.002 mm
  • R MPE (Repeatability): 0.00008"/0.002 mm
  • Measuring force MPL:
  • Protection: IP42
  • Type: ASME/ANSI/AGD Standard
  • Mass: 165 g
  • Display: LCD, character height 11 mm, 330degree rotatable
  • Max. response speed: Unlimited
  • Measurement frequency (MAX/MIN/RANGE): 50 times/s
  • Alarm: Low voltage, setting errors, sensor error, display overflow a.s.o.
  • Stem: 9.52 mm
  • Contact point: Carbide ball, thread: No.4-48UNF
  • Power supply: 1 battery CR2032
  • Battery life: Approx. 2700 hours (continuous use)
  • DATA/HOLD: Yes
  • Digimatic data output: Yes
  • Digimatic S1 Bidirectional interface: Yes
  • ON/OFF: Yes
  • Analog bar resolution switchable: Yes
  • Function lock: Yes
  • GO/+/-NG judgement: Yes
  • ABS / INC (INC ZERO): Yes
  • Analog bar resolution selection: Yes
  • Auto Power OFF setting: Yes
  • Calculation function (with formula): Yes
  • Customizing keys: Yes
  • Counting direction switchable: Yes
  • Inch/Metric switchable: Yes
  • Calibration warning function: Yes
  • Digital step switchable: Yes
  • Digital Scale: Electrostatic capacitance type absolute linear encoder

Technical Resources