Meriam M101-AN1551

Single Function Calibrator 0-1551mmHg Absolute

Order #: M101-AN1551

Mfg #: ZM101-4

Questions about availability or need help? Contact Us:

(800) 633-0561
Special Price $563.50 Regular Price $600.00

Meriam M101-AN1551

Single Function Calibrator 0-1551mmHg Absolute

Order #: M101-AN1551

Mfg #: ZM101-4

Special Price $563.50 Regular Price $600.00
Availability:
Item discontinued
View Available Models:
  1. Meriam M101-4AN1551
    Meriam M101-4AN1551
    Single Function Calibrator 0-1551mmHg Absolute
    $550.00

Only need this item for a short time? Learn about rentals

Questions about this product? Speak to an expert

Product Highlights

  • Engineering Units: Inches of H2O at 20° C, mm of H2O at 20°C, mm of Hg at 0°C, Inches of Hg at 0°C, kPa, mBar, Bar, PSI and user selectable
  • Media Compatibility: Non-isolated sensor for clean, dry, non-corrosive gases
  • Pressure Limits: (DN) units - 3 x F.S. on high side only or 200 PSI, whichever is less.
  • Pressire Limits: (GN or AN) units - 3 x F.S. range or 200 PSI, whichever is less
  • Accuracy: No temperature effect over the entire operating range 14F° to 122°F (-10C° to +50°C)
  • Min/Max: Displays the MIN and MAX pressures
  • Hold: Freezes the pressure measurement on the display, however, the bar graph is still active
  • Average: Displays a continuous filtered average of the pressure measurements
  • Temperature: Displays the internal ambient temperature of the M1 in °C or ° F
  • Record Mode: Can store up to 240 pressure measurements; Automatic – the current value is automatically stored every 5 seconds, for up to 20 minutes; Manual – the current value is stored every time the Units key is pressed, up to 240 times
  • Backlight: A green backlight is user activated via the backlight key. A red backlight is automatically activated during an error/over range condition
  • Auto Shutoff: To conserve battery life, the M1 will automatically power off after 20 minutes of keypad inactivity
  • Field Recalibration: M1 can be calibrated in the field for zero and span
  • Low Battery Indication: BAT icon is displayed when batteries require replacement. Approximately 2 hours of run time is provided on a low battery condition
  • Bar Graph: Horizontal bar for full scale pressure reference (0-100%)

Special Member Pricing
Buy with Calibration
Rental Instruments
Access to 100,000+ products
1,000's of instruments in stock
Product selection expertise
Application assistance
Purchase with a PO

All products in this series