Meriam M101-13GN0050

Single Function Calibrator 0-50 PSIG

Order #: M101-13GN0050

Mfg #: M101-13GN0050

Questions about availability or need help? Contact Us:

(800) 633-0561
Special Price $588.00 Regular Price $600.00

Meriam M101-13GN0050

Single Function Calibrator 0-50 PSIG

Order #: M101-13GN0050

Mfg #: M101-13GN0050

Special Price $588.00 Regular Price $600.00
Availability: Item ships in about Ships in 2-3 weeks
Available Promotions

Choose Your Options:

Add Accredited Calibration

You have chosen to add the following Calibration Services to Your Order

Make sure your instrument is calibrated and ready to use the minute you open the box by adding our expert calibration service. Why Calibrate?

Already have this this item and need calibration? Request a calibration quote

Only need this item for a short time? Learn about rentals

Questions about this product? Speak to an expert

Product Highlights

  • Engineering Units: Inches of H2O at 20° C, mm of H2O at 20°C, mm of Hg at 0°C, Inches of Hg at 0°C, kPa, mBar, Bar, PSI and user selectable
  • Media Compatibility: Non-isolated sensor for clean, dry, non-corrosive gases
  • Pressure Limits: (DN) units - 3 x F.S. on high side only or 200 PSI, whichever is less.
  • Pressire Limits: (GN or AN) units - 3 x F.S. range or 200 PSI, whichever is less
  • Accuracy: No temperature effect over the entire operating range 14F° to 122°F (-10C° to +50°C)
  • Min/Max: Displays the MIN and MAX pressures
  • Hold: Freezes the pressure measurement on the display, however, the bar graph is still active
  • Average: Displays a continuous filtered average of the pressure measurements
  • Temperature: Displays the internal ambient temperature of the M1 in °C or ° F
  • Record Mode: Can store up to 240 pressure measurements; Automatic – the current value is automatically stored every 5 seconds, for up to 20 minutes; Manual – the current value is stored every time the Units key is pressed, up to 240 times
  • Backlight: A green backlight is user activated via the backlight key. A red backlight is automatically activated during an error/over range condition
  • Auto Shutoff: To conserve battery life, the M1 will automatically power off after 20 minutes of keypad inactivity
  • Field Recalibration: M1 can be calibrated in the field for zero and span
  • Low Battery Indication: BAT icon is displayed when batteries require replacement. Approximately 2 hours of run time is provided on a low battery condition
  • Bar Graph: Horizontal bar for full scale pressure reference (0-100%)

Special Member Pricing
Buy with Calibration
Rental Instruments
Access to 100,000+ products
1,000's of instruments in stock
Product selection expertise
Application assistance
Purchase with a PO

All products in this series