Hioki IM3590

Chemical Impedance Analyzer

Order #: IM3590

Mfg #: IM3590

Questions about availability or need help? Contact Us:

(800) 633-0561
$9,295.00

Hioki IM3590

Chemical Impedance Analyzer

Order #: IM3590

Mfg #: IM3590

$9,295.00
Availability: Item ships in about Ships in 2-3 weeks
Available Promotions
This product is available for shipping to the United States and Puerto Rico only.
This product is available for shipping to the United States and Puerto Rico only.
This product is available for shipping to the United States and Puerto Rico only.

Only need this item for a short time? Learn about rentals

Questions about this product? Speak to an expert

Product Highlights

  • Basic accuracy of ±0.05%, broad measurement frequency range of 1 mHz to 200 kHz as well as DC capabilities and high-speed measurement at up to 2 ms
  • Cole-Cole plot display
  • Electrochemical material and component equivalent circuit analysis
  • Supports low-frequency measurements starting at 1 mHz
  • Frequencies as low as 1 mHz are needed to measure the electrochemical impedance of phenomena such as ion behavior. With an upper frequency limit of 200 kHz, Model IM3590 can also be used to measure properties such as solution resistance.
  • Display a variety of graphs, including Cole-Cole plots
  • The IM3590 can perform frequency sweep measurement at up to 801 points and display Cole-Cole plots. It can also perform level-sweep and time-interval measurements.
  • Measure 18 parameters, including dielectric constant and conductivity
  • In addition to Z, Y, ?, Rs (ESR), Rp, Rdc (DC resistance), X, G, B, Ls, Lp, Cs, Cp, D (tan s), Q, and T, the IM3590 can measure the dielectric constant (e) and conductivity (s).
  • Equivalent circuit analysis of electrochemical materials and components
  • The IM3590 provides four electrochemical component models and is capable of isolating and analyzing properties such as charge transfer resistance and electric double layer capacitance. It also provides five equivalent circuit analysis types for normal circuit elements, materials, and components

Special Member Pricing
Buy with Calibration
Rental Instruments
Access to 100,000+ products
1,000's of instruments in stock
Product selection expertise
Application assistance
Purchase with a PO

Measurement modesLCR mode, Continuous measurement mode (LCR mode / Analyzer mode), Analyzer mode (Sweeps with measurement frequency and measurement level, temperature characteristics, equivalent circuit analysis)
Measurement parametersZ, Y, θ, Rs (ESR), Rp, Rdc (DC resistance), X, G, B, Cs, Cp, Ls, Lp,
D (tanδ), Q, T, σ (conductivity), ε (dielectric constant)
Measurement range100 mΩ to 100 MΩ, 10 ranges (All parameters are determined according to Z)
Display rangeZ, Y, Rs, Rp, Rdc, X, G, B, Ls, Lp, Cs, Cp, σ, ε :
±(0.00000 [unit] to 9.99999G [unit], Absolute value display for Z and Y only
θ : ±(0.000° to 180.000°), D : ±(0.00000 to 9.99999)
Q : ±(0.00 to 99999.9), Δ % : ±(0.0000% to 999.999%)
T : -10.0°C to 99.9°C
σ, ε :±(0.00000f [unit] to 999.999G [unit]
Basic accuracyZ: ±0.05% rdg. θ: ±0.03°
Measurement frequency1 mHz to 200 kHz (5 digits setting resolution, minimum resolution 1 mHz)
Measurement signal levelNormal mode:
V mode/CV mode: 5 mV to 5 Vrms, 1 mVrms steps
CC mode: 10 μA to 50 mArms, 10 μArms steps
Low impedance high accuracy mode:
V mode/CV mode: 5 mV to 2.5 Vrms, 1 mVrms steps
CC mode:10 μA to 100 mArms, 10 μArms steps
Output impedanceNormal mode: 100 Ω, Low impedance high accuracy mode: 25 Ω
Display5.7-inch color TFT, display can be set to ON/OFF
Measurement time2 ms (1 kHz, FAST, display OFF, representative value)
FunctionsDC bias measurement, DC resistance temperature compensation (converted reference temperature is displayed), Temperature measurement, Battery measurement (Automatic DC biasing system), Comparator, BIN measurement (classification), Panel loading/saving, Memory function
InterfacesEXT I/O (Handler), USB communication (high-speed), USB memory
Optional: Choose 1 from RS-232C, GP-IB, or LAN
Power supply100 to 240 V AC, 50/60 Hz, 50 VA max.
Dimensions and mass330 mm (12.99 in) W × 119 mm (4.69 in) H × 168 mm (6.61 in) D, 3.1 kg (109.3 oz)
AccessoriesPower cord × 1, Instruction manual × 1, CD-R (Communication instruction manual and sample software [Communications control, accuracy calculation, and screen capture functionality] ) × 1