Hioki FT3470-51

Magnetic Field Tester Kit with 100CM Sensor

Order #: FT3470-51

Mfg #: FT3470-51

Questions about availability or need help? Contact Us:

(800) 633-0561
$5,995.00

Hioki FT3470-51

Magnetic Field Tester Kit with 100CM Sensor

Order #: FT3470-51

Mfg #: FT3470-51

$5,995.00
Availability: Item ships in about Ships in 2-3 weeks
Available Promotions
This product is available for shipping to the United States and Puerto Rico only.
This product is available for shipping to the United States and Puerto Rico only.
This product is available for shipping to the United States and Puerto Rico only.

Only need this item for a short time? Learn about rentals

Questions about this product? Speak to an expert

Product Highlights

  • Complies with ICNIRP 2010 guidelines as well as other relevant standards for evaluation testing.
  • Complies with IEC 62110/IEEE 644 as well as IEC 62233.
  • Bundled with 100 cm2 Sensor used with the IEC/EN 62233 standard analysis
  • User-selectable display units (T, A/m, and G)
  • Simple operation for easy measurement
  • Bundled with PC application software
  • Magnetic flux density (Band width) 10 Hz to 400 kHz/ 10 Hz to 2 kHz/ 2 kHz to 400 kHz
  • Exposure level General Public/ Occupational
  • Display Single axes X, Y, Z (2000 counts), Composite RMS value R (3464 counts), Magnetic flux density (unit: T, G, A/m), Exposure level (unit: %)
  • Magnetic flux density/ Ranges, Accuracy [X, Y, Z axes] Effective measuring ranges: 2.000 µT to 2.000 mT, 4 ranges, Accuracy: ±3.5% rdg. ±0.5% f.s.
  • [R axis] Effective measuring ranges: 3.464 µT to 3.464 mT, 4 ranges, Accuracy: ±3.5% rdg. ±0.5% f.s.
  • [Valid measurement frequency range] at 10 Hz-400 kHz mode: 50 Hz to 100 kHz, at 10 Hz-2 kHz mode: 50 Hz to 1 kHz, at 2 kHz-400 kHz mode: 5 kHz to 100 kHz
  • Exposure level/ Ranges, Accuracy [X, Y, Z axes] Effective measuring ranges: 20.00 % to 200.0 %, 2 ranges
  • [R axis] Effective measuring ranges: 34.64 % to 346.4 %, 2 ranges,
  • Accuracy: Smoothed edges 50 Hz to 1 kHz ±3.5% rdg. ±0.5% f.s.
  • Accuracy: Smoothed edges 1 kHz to 100 kHz ±5.0% rdg. ±0.5% f.s.
  • Interface [Supporting output] Resultant RMS level output, Exposure level output, Waveform output of magnetic flux density X/ Y/ Z each axis, Output rate: 0.1 mV/display value count
  • [USB 1.1] Data saving with the PC application
  • Other functions Memory function: Up to 99 measured value data, Slow function, Holds the maximum value, Auto power off, Buzzer sound on/off
  • Power supply LR6 alkaline battery ×4, Continuous use of 10 hours, or AC ADAPTER 9445-02 (1.0 VA max. consumption)
  • Dimensions, mass Main unit: 100 mm (3.94 in) W × 150 mm (5.91 in) H × 42 mm (1.65 in) D, 830 g (29.3 oz), (including batteries)
  • 100 cm2 Sensor: f122 mm (4.80 in) × 295 mm (11.61 in) L, 220 g (7.8 oz)

Each Unit Includes

  • 100 cm2 Sensor
  • Instruction manual
  • CD-R (PC application software DATA VIEWER for FT3470)
  • USB cable
  • 4 LR6 alkaline batteries
  • AC ADAPTER
  • EXTENSION CABLE
  • OUTPUT CABLE
  • Carrying case ×1

Special Member Pricing
Buy with Calibration
Rental Instruments
Access to 100,000+ products
1,000's of instruments in stock
Product selection expertise
Application assistance
Purchase with a PO