The Fluke Networks MFTKDCSMTESTKIT MPO Single-Mode (1310 nm/1550 nm) Data Center Maintenance and Troubleshooting Kit allows users to reduce single-mode multi-fiber trunk testing time by up to 80%. Users can take the complexity out of testing MPO trunks for loss and polarity. With the MultiFiber Pro that features an on-board MPO connector, all 12 fibers in a trunk can be tested within seconds and without the hassle of fan-out cords. Users can view loss measurements for individual fibers and polarity in a simple graphical format and results can be saved in the tester or transferred to LinkWare PC for reporting or archiving.
- Built-in MPO connector automates MPO fiber trunk testing process without need for fan-out cord
- Automatic scanning and testing of all fibers in MPO connectors via "SCAN ALL" command
- Automate 8, 10, and 12 fiber measurements
- Test and display loss or power and polarity on up to 12 single-mode fibers with single test
- View loss measurements for individual fibers and polarity in simple graphical format
- Polarity measurement allows users to test individual patch cords, permanent links, and channels for correct polarity
- Polarity agnostic referencing concept simplifies referencing step
- Troubleshoot MPO links and drill down to single fiber test results
- Light source identifies each fiber within MPO connector being tested for root-cause analysis if test limit is failed
- Easy-to-interpret test results with minimal navigation
- User interface displays all 12 fibers
- Save results within tester or transfer to LinkWare PC for reporting or archiving
Applications
- Data Center Backbone Testing
- Polarity Verification
- Optical Loss & Attenuation Measurement
- Endface Inspection
- Live Fiber Detection
- High-Speed Network Deployment
Each Unit Includes
- 1 - MultiFiber Pro Power Meter
- 1 - Light Source, 1210 nm
- 1 - Light Source, 1550 nm
- 1 - Set of Single-Mode Test Cords, Unpinned/Unpinned
- 1 - Set of Single-Mode Test Cords, Unpinned/Pinned
- 2 - Sets of Single-Mode Test Cords, Pinned/Pinned
- 2 - APC MPO Adapters
- 1 - Magnetic Strap Attachment
- 1 - FiberInspector Ultra Camera (FI-3000)
- 1 - Tip Set, 12/24 UPC and 12/24 APC
- 1 - Single Fiber Adapter for FI-1000 Tips
- 1 - AC Charger
- 1 - QuickStart Guide
- 1 - Holster
- 1 - FI-1000 Tip Kit
- 1 - FiberLert Live Fiber Detector
- 1 - Keyless MPO Inspection Tip (FI-3000TP-AMPO-12-32)
- 5 - 12/24 MPO QuickClean End Face Cleaners
- 1 - Versiv Cube Soft-Sided Carry Case
