Fluke Calibration 5615-6-D

Secondary Std PRT, 0.188"x6.0", -200??C to 300??C, 5-pin DIN

Order #: 98520TE

Mfg #: 5615-6-D

Questions about availability or need help? Contact Us:

(800) 633-0561
Call for price
Call for price

Fluke Calibration 5615-6-D

Secondary Std PRT, 0.188"x6.0", -200??C to 300??C, 5-pin DIN

Order #: 98520TE

Mfg #: 5615-6-D

Call for price
Call for price
Availability:
Item discontinued

Only need this item for a short time? Learn about rentals

Questions about this product? Speak to an expert

Product Highlights

  • Temperature range: –200 °C to 300 °C
  • Nominal resistance at 0 °C: 100 Ω ± 0.10 Ω
  • Temperature coefficient: 0.0039250 Ω/Ω/°C
  • Short-term repeatability: ±0.013 °C at 0.010 °C (Three thermal cycles from min to max temp, includes hysteresis, 99.9 % confidence)
  • Drift: ±0.01 °C at 0.010 °C (After 100 hrs at max temp, 99.9 % confidence)
  • Sensor length: 28 mm (1.1 in)
  • Sensor location: 6.9 mm ± 3.3 mm from tip (0.27 in ± 0.13 in)
  • Sheath diameter tolerance: ±0.127 mm (±0.005 in)
  • Sheath material: Inconel™ 600
  • Minimum insulation resistance: 1000 MΩ at 23 °C
  • Transition junction temperature range: –50 °C to 200 °C
  • Transition junction dimensions: 71 mm x 13 mm dia (2.8 in x 0.5 in)
  • Maximum immersion length: 102 mm (4 in)
  • Response time: 9 seconds typical
  • Self heating (in 0 °C bath): 50 mW/°C
  • Lead-wire cable type: Teflon™ insulated with Teflon™ jacket, 22 AWG
  • Lead-wire length: 183 cm (72 in)
  • Lead-wire temperature range: –50 °C to 200 °C
  • Termination: 5 pin DIN

Each Unit Includes

  • NVLAP Accredited Calibration Certificate

Special Member Pricing
Buy with Calibration
Rental Instruments
Access to 100,000+ products
1,000's of instruments in stock
Product selection expertise
Application assistance
Purchase with a PO

All products in this series