Fluke 80I-110S AC/DC AC/DC Current Clamp

Order # 80I-110S | Mfg # 114519

$1,174.99

In stock

The 80I-110s is compatible with any Fluke ScopeMeter Test Tool, Power Harmonics Analyzer, Oscilloscope, Multimeter, or other voltage measurement device that has the following features: BNC input connectors or if using a meter convert the banana plugs to a BNC connector using the adapter PM9081/001.

Tariff fees or manufacture imposed surcharges may be applicable.

This product is available for shipping to the United States, Canada, and Puerto Rico only.

Technical Resources

Fluke 80I-110s Clamp-on AC/DC Current Probe Datasheet
Fluke 80i-110s Instruction Sheet

Specifications

Specifications
Nominal current range	10 A, AC/DC
Nominal current range	100 A, AC/DC
Continuous current range	0.1 A - 10 A AC/DC
Continuous current range	1 A - 100 A AC/DC
Maximum non-destructive current	140 A - 2 kHz
Lowest measurable current	0.1 A
Basic accuracy	100 mV/A setting: 50 mA to 10 A ±3% of reading +50 mA
	10 mV/A setting: 50 mA to 40 A ±4% of reading +50 mA
	40 A to 80 A ±12% of reading +50 mA
	80 to 100 A ±15% of reading
Useable frequency	DC - 100 kHz
Output level(s)	10 A range: 100 mV/A
Output level(s)	100 A range: 10 mV/A
Zero error adjustment	Yes
Safety Specifications
Safety	CAT II, 600 V
Safety	CAT III, 300 V
Maximum voltage	600 V
Mechanical and General Specifications
Warranty	1 year
Battery life	9 V, 55 h
Maximum conductor diameter	11.8 mm
Output cable length	1.6 m
BNC adapter	Yes