Your Cart
You have no items in your shopping cart.
US 
CAN - en
Dwyer Instruments 2300-0
MagnehelicDiff.Press.Gage,.25-0 .25(Cal'd.forVert.ScalePositio
Order #: 2300-0
Mfg #: 2300-0
$103.80
Dwyer Instruments 2300-0
MagnehelicDiff.Press.Gage,.25-0 .25(Cal'd.forVert.ScalePositio
Order #: 2300-0
Mfg #: 2300-0
$103.80
Select the Magnehelic gage for high accuracy--guaranteed within 2% of full scale--and for the wide choice of 81 models available to suit your needs precisely. Using Dwyer's simple, frictionless Magnehelic gage movement, it quickly indicates low air or non-corrosive gas pressures--either positive, negative (vacuum) or differential. The design resists shock, vibration and over-pressures. No manometer fluid to evaporate, freeze or cause toxic or leveling problems. It's inexpensive, too. The Magnehelic gage is the industry standard to measure fan and blower pressures, filter resistance, air velocity, furnace draft, pressure drop across orifice plates, liquid levels with bubbler systems and pressures in fluid amplifier or fluidic systems. It also checks gas-air ratio controls and automatic valves, and monitors blood and respiratory pressures in medical care equipment.
Availability: Ships in 3-4 weeks
Product Highlights
- Bezel provides flange for flush mounting in panel.
- Clear plastic face is highly resistant to breakage. Provides undistorted viewing of pointer and scale.
- Precision litho-printed scale is accurate and easy to read.
- Red tipped pointer of heat treated aluminum tubing is easy to see. It is rigidly mounted on the helix shaft.
- Pointer stops of molded rubber prevent pointer over-travel without damage.
- "Wishbone" assembly provides mounting for helix, helix bearings and pointer shaft.
- Jeweled bearings are shock-resistant mounted; provide virtually friction-free motion for helix. Motion damped with high viscosity silicone fluid.
- Zero adjustment screw is conveniently located in the plastic cover, and is accessible without removing the cover. O-ring seal provides pressure tightness.
- Helix is precision made from an alloy of high magnetic permeability. Mounted in jeweled bearings, it turns freely, following the magnetic field to move the pointer across the scale.
- Calibrated range spring is flat spring steel. Small amplitude of motion assures consistency and long life. It reacts to pressure on diaphragm. Live length adjustable for calibration.
- Silicone rubber diaphragm with integrally molded O-ring is supported by front and rear plates. It is locked and sealed in position with a sealing plate and retaining ring. Diaphragm motion is restricted to prevent damage due to overpressures.
- Die cast aluminum case is precision made and iridite-dipped to withstand 168 hour salt spray corrosion test.
- Exterior finished in baked dark gray hammerloid. One case size is used for all standard pressure options, and for both surface and flush mounting.
Overpressure Protection
Blowout plug is comprised of a rubber plug on the rear which functions as a relief valve by unseating and venting the gage interior when over pressure reaches approximately 25 PSIg (1.7 bar). To provide a free path for pressure relief, there are four spacer pads which maintain 0.023" clearance when gage is surface mounted. Do not obstruct the gap created by these pads. The blowout plug is not used on models above 180" of water pressure, medium or high pressure models, or on gages which require an elastomer other than silicone for the diaphragm. The blowout plug should not be used as a system overpressure control. High supply pressures may still cause the gage to fail due to over pressurization, resulting in property damage or serious injury. Good engineering practices should be utilized to prevent your system from exceeding the ratings or any component.
O-ring seal for cover assures pressure integrity of case. Samarium Cobalt magnet mounted at one end of range spring rotates helix without mechanical linkages.
- Range 0.25-0-0.25 in H2O
- Minor divisions .01
- Calibrated for vertical scale position
-
Terminator 2: Judgment Day - T-800 Ultimate Edition 1/3 Scale StatueTerminator 2: Judgment Day - T-800 Ultimate Edition 1/3 Scale Statue
"Come with me if you want to live."
It doesn’t get more epic than this as Darkside Collectibles Studio celebrate the 30th Anniversary of Terminator 2: Judgment Day with this incredible T-800 Ultimate Edition 1/3 Scale Statue.
Capturing the memorable scene of the infamous Galleria shoot-out in the legendary film, the T-800 Ultimate Edition 1/3 Scale Statue features an impeccable likeness of Arnold Schwarzenegger in his iconic role.
Following the 30th Anniversary Sarah Connor statue portrayed by Linda Hamilton, and T-1000 portrayed by Robert Patrick, this statue has been masterfully handcrafted and individually hand-painted to the highest quality standards. The impressive statue stands over 27 inches tall with hyper-realistic clothing details and a stunning hyper realistic life-like skin likeness portrait of the one and only Arnold Schwarzenegger as the Terminator.
Fully sculpted to the finest detail, this masterpiece gives collectors a super realistic look recreation of the iconic character, with each part of the piece down to the leather jacket crafted to pure perfection. The T-800’s weapons include a Winchester 1887 in hand and Colt Series 70/Detonics 1911 Hybrid belt pistol, which have been precisely reproduced with a high attention to the detail, and removable sunglasses complete the Terminator’s trademark look.
The limited edition T-800 Ultimate Edition 1/3 Scale Statue stands on a themed base featuring the gold box and the roses from the first shootout scene of the movie against T-1000, completing the iconic scene from the film.
Furthermore, this Ultimate Edition features an addition base and weapons to recreate the Pescadero Hospital escape and the Cyberdyne Minigun police shoot-out. The Cyberdyne shoot-out features the Terminator on a Plain or minigun bullet base, holding the Hand Held M134 Minigun with the minigun ammo bag strapped in one shoulder and the M79 grenade launcher on the other. The statue can be displayed with or without the fabric grenade launcher belt. Alternatively you can have the Terminator holding the M79 Grenade Launcher.
Created under license by Studio Canal and Oak Productions, the T-800 Ultimate Edition 1/3 Scale Statue is the final character Statue of the line of Terminator 2: Judgment Day series developed by Darkside Collectibles Studio, and comes with a printed Certificate of Authenticity licensed to carry the original signature of the Terminator Arnold Schwarzenegger.
There’s no future for your Terminator collection without the limited edition T-800 Ultimate Edition 1/3 Scale Statue.
What’s in the Box?
- One (1) T-800 1/3 Scale Statue
- One (1) fully sculpted statue with lifelike skin details of the T-800
- One (1) Colt Series 70/Detonics 1911 Hybrid pistol belt accessory
- One (1) pair of sunglasses
- One (1) swappable right arm holding shotgun
- One (1) swappable right arm holding grenade launcher (with fabric strap)
- One (1) left swappable arm
- One (1) left swappable hand with lifelike skin details
- One (1) left swappable hand wearing glove
- One (1) pair of arms holding M134 Minigun
- One (1) swappable removable M79 grenade launcher (with fabric strap)
- One (1) fabric grenade launcher belt
- Nine (9) grenade launcher bullets for belt
- One (1) M134 Minigun ammo bag with fabric strap
- Forty (40) Minigun Bullets base accessory for Cyberdyne Attack base theme
- Seven (7) roses base accessory for Galleria shoot out base theme
- One (1) upper part gold rose-box base accessory for Galleria shoot out base theme
- One (1) lower part gold rose-box for Galleria shoot out base theme
- One (1) base with removable magnetic theme plaque
- One (1) printed Certificate of Authenticity licensed to carry the original signature of the actor Arnold Schwarzenegger
Attention International Customers: This item may be too heavy to check out through our online system. Please call us during business hours (Mon-Fri 9am-5:30pm AEST / AEDT) on +61 3 5240 7979 or email us at info@popcultcha.com.au to arrange a custom shipping quote.
Proudly brought to you by Popcultcha, Australia's home for striking statues. Check out our full range of impressive statues by clicking here.
This item comes with Free Shipping Australia wide.
As low as $3,199.99 -
Terminator 2: Judgment Day - T-800 1/3 Scale StatueTerminator 2: Judgment Day - T-800 1/3 Scale Statue
"Come with me if you want to live."
It doesn’t get more epic than this as Darkside Collectibles Studio celebrate the 30th Anniversary of Terminator 2: Judgment Day with this incredible T-800 1/3 Scale Statue.
Capturing the memorable scene of the infamous Galleria shoot-out in the legendary film, the T-800 1/3 Scale Statue features an impeccable likeness of Arnold Schwarzenegger in his iconic role.
Following the 30th Anniversary Sarah Connor statue portrayed by Linda Hamilton, and T-1000 portrayed by Robert Patrick, this statue has been masterfully handcrafted and individually hand-painted to the highest quality standards. The impressive statue stands over 27 inches tall with hyper-realistic clothing details and a stunning hyper realistic life-like skin likeness portrait of the one and only Arnold Schwarzenegger as the Terminator.
Fully sculpted to the finest detail, this masterpiece gives collectors a super realistic look recreation of the iconic character, with each part of the piece down to the leather jacket crafted to pure perfection. The T-800’s weapons include a Winchester 1887 in hand and Colt Series 70/Detonics 1911 Hybrid belt pistol, which have been precisely reproduced with a high attention to the detail, and removable sunglasses complete the Terminator’s trademark look.
The limited edition T-800 1/3 Scale Statue stands on a themed base featuring the gold box and the roses from the first shootout scene of the movie against T-1000, completing the iconic scene from the film.
Created under license by Studio Canal and Oak Productions, the T-800 1/3 Scale Statue is the final character Statue of the line of Terminator 2: Judgment Day series developed by Darkside Collectibles Studio, and comes with a printed Certificate of Authenticity licensed to carry the original signature of the Terminator Arnold Schwarzenegger.
There’s no future for your Terminator collection without the limited edition T-800 1/3 Scale Statue.
Proudly brought to you by Popcultcha, Australia's home for striking statues. Check out our full range of impressive statues by clicking here.
This item comes with Free Shipping Australia wide.
As low as $2,599.99 -
Terminator 2: Judgment Day - T-800 on Motorcycle 1/4 Scale Diorama StatueTerminator 2: Judgment Day - T-800 on Motorcycle 1/4 Scale Diorama Statue
“I need your clothes, your boots, and your motorcycle”
After failing to kill Sarah Connor, the mother of the future leader of the human resistance, Skynet sends a more modernised Terminator back in time to kill her son, John Connor. But even the advanced T-1000 will struggle against the resilience and strength of the original T-800 that has been sent back to defend John and fight for the fate of mankind.
The T-800 on Motorcycle 1/4 Scale Diorama Statue by Darkside Collectibles brilliantly captures the sheer coolness and style of Arnold Schwarzenegger’s iconic portrayal of the Terminator in Jame’s Cameron’s classic 1991 movie Terminator 2: Judgement Day. Having taken two years to develop in partnership with Studio Canal and Oak Productions, this insanely awesome statue not only captures the Terminator’s style but also every detail with expert craftsmanship, right down to the authentic likeness of Arnold Schwarzenegger looking as bad to the bone as ever in his full leather gear and sunglasses, with one hand on the motorbike and the other readying his shotgun to blast Skynet’s latest model.
Crafted in high quality polystone, this limited edition quarter scale statue measures an impressive 19.69” tall by 27.56” wide, and comes with two interchangeable portraits, removable sunglasses, a silver metallic base with light-up functions, and a Certificate of Authenticity signed by the Terminator himself, Arnold Schwarzenegger.
The T-800 on Motorcycle 1/4 Scale Diorama Statue is the quintessential centrepiece for any Terminator collection.
What’s in the Box?
- One (1) fully sculpted T-800 statue
- One (1) fully sculpted motorcycle with chrome details
- One (1) interchangeable head facing the front
- One (1) interchangeable head facing the side
- One (1) pair of sunglasses
- One (1) silver metallic painted light up base
- One (1) certificate of authenticity signed by the Terminator Arnold Schwarzenegger
Product Dimensions: 19.69” H x 27.56” W x 13.78” D.
Attention International Customers: This item may be too heavy to check out through our online system. Please call us during business hours (Mon-Fri 9am-5:30pm AEST / AEDT) on +61 3 5240 7979 or email us at info@popcultcha.com.au to arrange a custom shipping quote.
Proudly brought to you by Popcultcha, Australia's largest and most comprehensive Terminator online store. Click here to see our full range of Terminator merchandise.
As low as $3,799.99 -
Terminator Genisys - T-800 2” ScalerScalers - Terminator Genisys - T-800 2” Scaler
From the newest instalment of the action-packed Terminator franchise, Terminator Genisys, come NECA’s new range of scalers. This T-800 Scaler, resembling Arnie’s character from the film is ready to scale any cords you have around the home or office for a some added decoration.
Click here if you want to live and see the rest of our Terminator merchandise.
As low as $8.99
