Com-Power CLCE-400 for Rent, Emissions Probe

Product Highlights

The CLCE-400 RF Current Probe is part of Com-Power's extensive line of radio frequency conducted emission/ immunity test equipment and calibration accessories. The CLCE-400 is suitable for compliance measurements required by CISPR 22 CISPR 32 DO-160 Mil Std 461 etc as well as for applied current monitoring during conducted immunity tests.

It's design incorporates a split-core ferrite in a rugged circular hinged enclosure; thereby allowing the probe to be opened on one side in order to easily place the wire cable(s) or cable bundle(s) to be tested into the probe window making the CLCE-400 much more convenient to use than other non-split core probes. The CLCE-400 is designed to be used in conjunction with a spectrum analyzer or EMI receiver or any 50 Ohm impedance measurement equipment which measure magnitude quantities in terms of true rms voltage.

• Frequency Range: 10 kHz to 400 MHz
• Suitable for CISPR Mil-Std 461 & DO-160
• Individual calibration
• Three-year warranty
• Frequency Range: 10 kHz to 400 MHz
• Window (Aperture) Diameter: 1.25 inches (32 mm)
• Outside Diameter: 2.83 inches (72 mm)
• Height: 0.76 inches (19.3 mm)
• Weight: 0.275 lbs. (0.125 kg)
• Connector: Type-N (Female)
• Transfer impedance (ZtΩ): 7Ω
• Transfer impedance (dBΩ): -21 to 17 dBΩ (typical)
• Max Primary Current (DC-400 Hz): 100 Amps
• Max Primary Current (RF): 4 Amps
• Max. Core Temperature: 248F (120C)